weird rattle problem, need suggestions

  • 1
    Participant count
  • Participant list

curtis96olds
10+ year member

Member
ok so today i put a couple layers of damplifier pro on the back wall of my truck, put my subs back in and the metal rattle is gone, but now i hear a different rattle...so i take the subs back out to see what it could be, and i narrowed it down to the little cabin vents that are in the back wall, the kind that flap open and they make one hell of a sound when subs are playing, but i didnt notice it before over the metal rattling. any suggestions on how to fix this? im sure some of you have ran into this before

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Yeah, somebody goofed. It was supposed to last 5. I have seen speakers fail at the solder joint on the cone under the black glue. But you are...
8
1K
Sometimes the sound gets a bit lower, then gets normal again, only listening to FM radio. It does not do this when streaming music via wired Apple...
0
1K
so an update: basically i got my 2nd car which i just installed a car amp kit and routed all the wires so i thought to myself lets take this amp...
5
1K
Error was fixed by soldering their connector on mine, mine wasn't color coded (e.g. red - switching power, yellow - constant power etc.) It was...
6
1K

About this thread

curtis96olds

10+ year member
Member
Thread starter
curtis96olds
Joined
Location
New Hampshire
Start date
Participants
Who Replied
Replies
0
Views
318
Last reply date
Last reply from
curtis96olds
IMG_5880.jpeg

Brendon Jenness

    May 11, 2024
  • 0
  • 0
IMG_3567.jpg

RedRyder18

    May 11, 2024
  • 0
  • 0

New threads

Top