weird power issue with HU install

tweedz
10+ year member

Member
i have a kd-s51 jvc HU connecting to a 93 civic

i dont have the white adapter that comes stock in car it was cut out before. so im wiring HU wire harness directly to car wires.

i am connecting constant 12v+ of car which is white/blue to yellow of harness which is memory/constant

switched on car = yellow/red to red on harness

and the ground

didnt bother with speakers yet because i wanted to see if it would power on as i was having issues with the HU power not working correctly since i bought car.

power was always on so i would have to take off faceplate or else radio would stay on. bought the new harness and trying to wire it correctly and am not getting any power at all sometimes.

but sometimes when i plug in the adapter to the back of the HU i can hear my amp/sub power on and a red ring will light up around vol knob and that is all that will happen. i have checked the fuses and none are blown

 
also, when it was connected and working before it stopped working

the constant and switched wires were connected both to the constant wire of the car making it stay on all the time even w.o key in ignition

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

tweedz

10+ year member
Member
Thread starter
tweedz
Joined
Location
Sandy, OR
Start date
Participants
Who Replied
Replies
5
Views
425
Last reply date
Last reply from
tweedz
IMG_20260515_202650612_HDR.jpg

sherbanater

    May 15, 2026
  • 0
  • 0
IMG_20260515_202732887_HDR.jpg

sherbanater

    May 15, 2026
  • 0
  • 0

New threads

Top