tutorial for installin a set of AMPED components?

[Sanchito 10+ year member]

i need a tutorial for installing a set of components that is amped.

i have searched on google too and cant find one.

Click to read more...

 

[x1le 10+ year member]

Here you go -

1. Connect woofer to crossover.

2. Connect tweeter to crossover.

3. Connect crossover to amp.

But seriously, what do you need to know?

 

[SPLluminator 10+ year member]

Here you go -
1. Connect woofer to amp.

2. Connect tweeter to crossover.

3. Connect crossover to crossover.

But seriously, what do you need to know?

I agree, do as said above

Haha

 

[Sanchito 10+ year member]

Here you go -
1. Connect woofer to crossover.

2. Connect tweeter to crossover.

3. Connect crossover to amp.

But seriously, what do you need to know?

so just hook up the amp's rca's to the mid/high on the HU output?

what about impedances?

 

[I Like Waffle]

last i checked most HUs dont have a mid/high RCA out, maybe front and rear? //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

But yea, its very easy, just hook the amp up, then hook up the comp set. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Sanchito 10+ year member]

mine does.

has sub/lows

then high and mids.

what about impedance's of the woofers and tweeters?

 

[x1le 10+ year member]

If wired to the crossover, the ohms will not change.

 

[Sanchito 10+ year member]

yeah but how are they with the amp?

same as with a sub?

in which case they are weird right?

cause the woofers are 3 ohms.

 

[IDSkoT 5,000+ posts]

i need a tutorial for installing a set of components that is amped.
i have searched on google too and cant find one.

It's self explanatory! You don't even have to worry about impedance!

(Most 4-ohm stable amps are 3-ohm stable.)

 

[IDSkoT 5,000+ posts]

yeah but how are they with the amp?
same as with a sub?

in which case they are weird right?

cause the woofers are 3 ohms.

Then make sure you have an amp that's at least 2 ohm stable. @ 3 ohms, you need an amp that can do about 150-250RMS @ 2-ohm (That is if the speakers need 100wrms)

 

[Supergumby5000 5,000+ posts]

mine does.
has sub/lows

then high and mids.

if you're talking about the alpine in your sig, no it doesnt.

 

[Sanchito 10+ year member]

Then make sure you have an amp that's at least 2 ohm stable. @ 3 ohms, you need an amp that can do about 150-250RMS @ 2-ohm (That is if the speakers need 100wrms)

speakers need 65 wrms.

so i need one that can do like 100-150 at 2 ohm?

 

[nineball 10+ year member]

what amp are you using? are you using the equipment in your sig?

 

[Sanchito 10+ year member]

yes. the equipment in my sig.

speaker amp will be a sundown SAX-100.2

 

[nineball 10+ year member]

1. Connect woofer to crossover.

2. Connect tweeter to crossover.

3. Connect crossover to amp.

do that. the focals are rated at 60rms but can most likely take more. set your gains accordingly on the amp. they will give the amp a 4ohm load on each channel.