Threatcon 4 12" Pre-sale!!

This post is for our new Threatcon-4 12" which we state is 1200 watts RMS. This woofer will take the RMS all day and at $200 delivered pre sale price is by far a Great buy. Look at the components being used and read the ts specs. You can see it is the real deal and will be a leader in The 1200 watt category. If you want to discuss a 2000+ watt sub look for details on our Threatcon-6 subs that will be released around December. This woofer will be also have a 4" coil (But different Coil than the threatcon-4 of Course) and this one will be designed to handle extreme heat. We are designing the Threatcon-6 sub to have a 2000 watt RMS rating and should retail in mid $350 range.

 
This post is for our new Threatcon-4 12" which we state is 1200 watts RMS. This woofer will take the RMS all day and at $200 delivered pre sale price is by far a Great buy. Look at the components being used and read the ts specs. You can see it is the real deal and will be a leader in The 1200 watt category. If you want to discuss a 2000+ watt sub look for details on our Threatcon-6 subs that will be released around December. This woofer will be also have a 4" coil (But different Coil than the threatcon-4 of Course) and this one will be designed to handle extreme heat. We are designing the Threatcon-6 sub to have a 2000 watt RMS rating and should retail in mid $350 range.
Sounds like a winner! Threatcon 4 for me for now!!!

 
Hello,I am new to this so go easy on me lol But I see these need to be in a sealed box with 1 cf of air space , What would happen if i put them in a box with only .95 of air space ? Or should I be looking for smaller subs ? I poster this already one and nobody answered ? is that because its a dumb question ? sorry but I dont know much about this stuff yet. And a sufficant amp size suggestion would be a great help also

Thanks

 
Hello,I am new to this so go easy on me lol But I see these need to be in a sealed box with 1 cf of air space , What would happen if i put them in a box with only .95 of air space ? Or should I be looking for smaller subs ? I poster this already one and nobody answered ? is that because its a dumb question ? sorry but I dont know much about this stuff yet. And a sufficant amp size suggestion would be a great help alsoThanks
Polyfill and it will be fine

 
not even going to play like i know what you mean lol Polyfill ? also i got a chance to buy Kicker zx 1500.1 or zx 2500.1 amps are these amps any good and would either be good to use with these subs ?

 
not even going to play like i know what you mean lol Polyfill ? also i got a chance to buy Kicker zx 1500.1 or zx 2500.1 amps are these amps any good and would either be good to use with these subs ?
Yea these are good amps man, kicker is mostly frowned upon on this site but as far as their amps go they aren't that bad at all.

 
not even going to play like i know what you mean lol Polyfill ? also i got a chance to buy Kicker zx 1500.1 or zx 2500.1 amps are these amps any good and would either be good to use with these subs ?
polyfill is used in sealed sub boxes to make the sub "think" it's in a larger enclosure, as far as the amps, if you plan to run one of these get the 1500 and a dual 4 ohm sub, if you plan to run 2 get 2 dual 2 ohm subs. from what I've heard (no personal experience) they are decent amps, if you get them at a decent price. if you are paying retail for them better can be had for the price.

 
Ya i am gettin a good price. Should i just get the 2500.1 and be done or too over kill ? I want to run two of these subs ,will the 1500.1 do it?

For that matter i have a Kicker zx 1000.1 will it do it ? i had it wired to one kicker cvr dual voice coil and it did pretty good but i didnt think it would be enough to run two 12s

 
Ya i am gettin a good price. Should i just get the 2500.1 and be done or too over kill ? I want to run two of these subs ,will the 1500.1 do it?For that matter i have a Kicker zx 1000.1 will it do it ? i had it wired to one kicker cvr dual voice coil and it did pretty good but i didnt think it would be enough to run two 12s
for 2 of these get te 2500

 
Never used polyfill but from what I've seen, you can just line the sides and back of the box to "trick" the woofer. And get the 2500.1 man. You can always wire to 1 ohm and tune so you're only sending 1k or 1.5k watts wise to a woofer. I've got a 2200 @ 1 ohm American Bass VFL-Hybrid 4480.1 amp right now that I'm only running 1 k with. Nothing wrong at all with some overhead wattage. I can't wait to pick up one of the Threatcon 4's and am glad that I got an amp with plenty of overhead for an upgrade like this.

 
Id love to see some of these 2500+ watt 3in coil subs truly run on 2500 watts for long time and see how many last. I'm not talking 2500watt amp wired to 1ohm rising to 3ohm only putting out 800 watts for 30 seconds. A 4 in coil should handle 1600watts true clamped power for a straight 30+ mins 3in 1200watts. Cooling can increase this a couple hundred watts tops.
I have a IA DP that I run over 1700 watts to daily for long periods of time with no problems and it has a 3" VC. I have never felt the dust cap get more then slightly warm.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

C2 Audio

10+ year member
Senior VIP Member
Thread starter
C2 Audio
Joined
Location
Youngstown, OH
Start date
Participants
Who Replied
Replies
92
Views
18,749
Last reply date
Last reply from
jasonbillnelson
IMG_1882.jpeg

slater

    Oct 4, 2025
  • 0
  • 0
Screenshot_20251004_120904_Photo Translator.jpg

1aespinoza

    Oct 4, 2025
  • 0
  • 0

New threads

Top