I got my system installed a couple weeks ago, all runs fine except for 1 problem i have which i cannot figure out if its the amplifier or just the wiring thats causing this problem.
So heres the problem.
When i turn my volume to 25/35, after a while or when a loud ass bass hits, my subs would cut off. The amplifier power is still on but not feeding my subs any power. All the wires are connected correctly. The ground wire from my capacitator is hooked onto the chasis near my backseat. Note: its not grounded on bare metal either, its grounded on the paint.
Does this sound like a bad ground?
Im pretty new into car audio and i assume when i jack up the volume and when theres really loud bass that hits it doesnt ground properly so the amp doesnt feed the subs any power as some sort of protection or something.
My subs will work after i turn off my car for a good 30mins.
I hope this aint a amp defect b/c i dont want to go through the hassle to get it repaired since i bought the amp on ebay.
500.1 amp powering 2 12" V3's
4GA power kit.
PLEASE HELP, and THANKS A BUNCH in advance.
So heres the problem.
When i turn my volume to 25/35, after a while or when a loud ass bass hits, my subs would cut off. The amplifier power is still on but not feeding my subs any power. All the wires are connected correctly. The ground wire from my capacitator is hooked onto the chasis near my backseat. Note: its not grounded on bare metal either, its grounded on the paint.
Does this sound like a bad ground?
Im pretty new into car audio and i assume when i jack up the volume and when theres really loud bass that hits it doesnt ground properly so the amp doesnt feed the subs any power as some sort of protection or something.
My subs will work after i turn off my car for a good 30mins.
I hope this aint a amp defect b/c i dont want to go through the hassle to get it repaired since i bought the amp on ebay.
500.1 amp powering 2 12" V3's
4GA power kit.
PLEASE HELP, and THANKS A BUNCH in advance.