This be a good amp/sub match ??

[dej]

This a good match for the subs I have??

http://cgi.ebay.com/NEW-ALPINE-MRD-M605-MONO-BLOCK-CAR-AUDIO-AMPLIFIER-AMP_W0QQitemZ5853493448QQcategoryZ79825QQrdZ1QQcmdZViewItem

These are the subs I have.... The Pioneer Premier TS-SW124D

http://www.pioneerelectronics.com/pna/product/detail/0,,2076_4061_90400838_tab=B,00.html?compName=PNA_ProductDetailComponent

Click to read more...

 

[Ricky616 10+ year member]

yea its a good match but you can get a better amp for cheaper price

 

[Jason Sybert 10+ year member]

I would look for an amp closer to the subs RMS or the otherway around. The RMS is what you need to base your sub to amp compatabilities on. the amp runs 600 WRMS and the sub is only rated for 300 WRMS.

 

[dej]

I thought i mentioned it but i actually have 2 of those subs.....

I would look for an amp closer to the subs RMS or the otherway around. The RMS is what you need to base your sub to amp compatabilities on. the amp runs 600 WRMS and the sub is only rated for 300 WRMS.

 

[slain93gsr 10+ year member]

that set up will be fine. the amp does 600 ish @ 2ohms as long as the two subs you are using are 4ohm then eveything should be ok

 

[Jason Sybert 10+ year member]

that set up will be fine. the amp does 600 ish @ 2ohms as long as the two subs you are using are 4ohm then eveything should be ok

Yeah that should work that way but if it is doing 1200 at 2 ohms and both subs are 4 ohm then the subs will fry after a while. After doing research I say you will be fine.