T3 Audio build, 6 12s Tahoe

[Bass911 10+ year member]

This was suppose to be a raw box because it's a temp setup, but I decided to cover it anyway. The subs were so cheap I wanted to experiment with them. This box is 12cu ft tuned around 30hz after all displacements. It has 6 4" pvc ports. This is a simple build with no fancy bracing, but my box does not flex. This box has been installed for about 3 months so far. Subs are being pushed by a Brz2400.1d.

Ports are held in by Liquid Nails, no screws

Click to read more...

 

[Bass911 10+ year member]

2x4s for bracing, but they are really 1.5x3.5 for anyone that plan on using these.

Liquid Nails and screws to hold them while glue sets.

 

[Bass911 10+ year member]

 

[Bass911 10+ year member]

Covering it with Vinyl

Bad pic, but the vinyl is smoothed out and tight to the box

 

[Bass911 10+ year member]

 

[Bass911 10+ year member]

A few interior pics that shows some bracing but not all of it

 

[slvrado28z 10+ year member]

nice box...do u have any port noise cause didnt use aeros?

 

[Bass911 10+ year member]

All Done. I think it turned out ok.

In my Tahoe that was stolen. I never got my seats redone that they tore up.

These sound better than I expected. They play pretty flat, and they hit the high and low low bass. I've pushed them pretty hard and haven't smelled any coil yet. These are not my dream subs. I just needed something to hold me over until I got something better.

 

[DoesDad 10+ year member]

Nice! Looks good. You going to meter it at all just for the Hell of it?

 

[Bass911 10+ year member]

nice box...do u have any port noise cause didnt use aeros?

I can't really tell because the bass makes the interior rattle so much. I'm too lazy to deaden the truck, but I will eventually. I don't think there is any port noise. I would have used aeros but I didn't really care much about this build. That 10 foot thin walled pvc is only about $10. I don't think aeros would be a night and day difference. I will use them when I get some subs I love.

 

[Bass911 10+ year member]

Nice! Looks good. You going to meter it at all just for the Hell of it?

If I find a local show, I will meter it.

 

[Bass911 10+ year member]

 

[82 cutlass 10+ year member]

Good work man...looks good !

 

[Phoenix Risen 10+ year member]

box looks good, but it looks like the aeros are choked off being so close the the back...

 

[Bass911 10+ year member]

Good work man...looks good !

Thanks