System Suggestion - $1500 Budget

[MisterGrubbs 5,000+ posts]

BTL, DD 9500, MT, AudioQue HDC3, TC's, there are tons of bad *** subwoofers that will get the job done and then some, it's all up to you as to how you want to do it.

 

[RipDaJacka]

I got my 9515G bnib for under 500.. But go with 2 HDC3's thats about $500ish and a MTX 92001 (3500+watt rms) for $450 shipped... get a Kicker 0'1 Hyperflex Kit for $80ish...get about 10more Feet of 0/1 for Big 3.. A HO alt for about $250.. check out http://www.remybattery.com and get Deka Intimidator G31 and a G34 battery for starter and trunk.. a Matching 2 channel MTX 3202 is $100 shipped and PD RSD's are $87... $30 for ring terms and maybe a distro block

2 subs- audioque.com $229ea+ ship

2 amps- $449+sh and 89+sh

amp kit- ebay

2 batts- remybattery

ALT -

big 3 wiring- knukoncepts/ classifieds

Comp set- ebay

 

[RipDaJacka]

I agree with MR Grubbs but there is a Prob.. wou will not fit 2 15" subs and a port thru ur opening.. Go with 12's.... and get the MTX 92001 amp, you will be VERY happy.. definately seal off ur trunk, its the only way to do it IMO... that should get u mid-upper 140s easy...

I will try 2 keep up with this thread.. need any help just PM me

 

[dvrmstrng 5,000+ posts]

i think you should pick up my rainbow profi vanadium phase plugs and USAMPS 2 channel for $700 shipped....pick up a sub stage from one of the boys in this thread....you got a deck, and your set.

 

[JimJ 5,000+ posts]

A fart sounds like a fart pretty much any way you slice it.

 

[RipDaJacka]

A fart sounds like a fart pretty much any way you slice it.

WHAT???? you can slice a fart?

 

[dvrmstrng 5,000+ posts]

indeed

nG

 

[JimJ 5,000+ posts]

With certain food, I think so //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[MisterGrubbs 5,000+ posts]

I agree with MR Grubbs but there is a Prob.. wou will not fit 2 15" subs and a port thru ur opening.. Go with 12's.... and get the MTX 92001 amp, you will be VERY happy.. definately seal off ur trunk, its the only way to do it IMO... that should get u mid-upper 140s easy...
I will try 2 keep up with this thread.. need any help just PM me

You dont think he could pull them off? They might have to be offset back a little bit or something, but I'm sure there's some way to make it happen. There's a guy on here somewhere with two 15" BTL's sealed off, I coulda sworn. Then again, hell, they're probably 12's and I'm just a dickshit

 

[dvrmstrng 5,000+ posts]

port 2 12's dont seal 15's....especially BTLs

 

[FeS RoY 10+ year member]

I agree with MR Grubbs but there is a Prob.. wou will not fit 2 15" subs and a port thru ur opening.. Go with 12's.... and get the MTX 92001 amp, you will be VERY happy.. definately seal off ur trunk, its the only way to do it IMO... that should get u mid-upper 140s easy...
I will try 2 keep up with this thread.. need any help just PM me

thanks, where can i find a HO alt.. for 250?

 

[RipDaJacka]

I swear man.. I was gonna run 2 2515's but me and my homie measured.. its only like 34in opening.. so thats 30" give or take a bit.. plus wood thickness... and thats not enough width for a port and 2 15's.. 2 12s will fit Nice... and the opening isnt even 15 in tall (in my Monte) so my sub is set back into the trunk and sealed off from there.. See my Avatar for what I mean there.. Go with 12's

 

[FeS RoY 10+ year member]

oh and the design didnt change much from your model to the 06 rite? so about how many cubes is the trunk?

 

[RipDaJacka]

I bought mine from Iraggi for $238 shipped.. look on ebay and find a alt that will fit a 2000-up monte and if he doesnt have your year he will most likely Match the auction price.. Good Alt IMO

My trunk fit 5 cubes with about 10in of leadway in the trunk.. using the whole trunk will be about 6-7cubes... My box was built into the trunk by JLFX..he is a member on here and he's local to me

 

[FeS RoY 10+ year member]

never got around to taking pics, come to find out, the cam didnt need batteries, it was broken, i ordered another cam should be in tomorrow, hopefully