System for Hair Tricks

[Phoenix Risen 10+ year member]

if thats what space your going to be working with. give up on being loud.

you only have ~1.75 cubes before any displacements.

 

[Bettr n' Revrse 5,000+ posts]

if thats what space your going to be working with. give up on being loud.
you only have ~1.75 cubes before any displacements.

Yep at best... I said what about an SA 8 ported?

 

[Phoenix Risen 10+ year member]

a single sa-8 would be ok, but its not going to be easy fitting it back there with out it hitting anything or being choked out.

 

[pro-rabbit 5,000+ posts]

if thats what space your going to be working with. give up on being loud.
you only have ~1.75 cubes before any displacements.

Just over 2ft3 if he uses 1/2" MDF...but that wouldn't really be advisable lol... I would do 3/4" MDF 10" sub with a 3" PVC port to save on space.

 

[Bassin Brandon]

Phoenix.. i see my stupidity has made its way into your signature //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[Phoenix Risen 10+ year member]

regardless of what sub he ends up running its going to be tough getting it in that space with enough room around it to keep it playing properly. but either a single 8 or a single 10 will be the best bet.

and nothing personal brandon. i just like laughing at jl.

 

[Bettr n' Revrse 5,000+ posts]

regardless of what sub he ends up running its going to be tough getting it in that space with enough room around it to keep it playing properly. but either a single 8 or a single 10 will be the best bet.

Yep

 

[pro-rabbit 5,000+ posts]

regardless of what sub he ends up running its going to be tough getting it in that space with enough room around it to keep it playing properly. but either a single 8 or a single 10 will be the best bet.

Agreed, it will be hard to get sound out because of space available....but it could sound decent I think.... The single 8" would be a bit easier, now that I think about it.

 

[Bettr n' Revrse 5,000+ posts]

Agreed, it will be hard to get sound out because of space available....but it could sound decent I think.... The single 8" would be a bit easier, now that I think about it.

thats what I was thinkin... or I have some 8" shallows for him? lol

 

[LosIsATool 5,000+ posts]

I thought 2 sealed 10s down firing on 750 watts would be his best bet.

OR take those JLs and put them under the front seats for the best sound..

 

[LosIsATool 5,000+ posts]

But i dont think this is about having good sound now is it?

 

[Germ305 10+ year member]

With the amount of space you are working with. a hair trick is not going to happen unless you remove the back seats and go bigger. Take the advice of what people have said here because it is very good advice that they are giving you.

 

[Phoenix Risen 10+ year member]

But i dont think this is about having good sound now is it?

with his space getting loud at least to the point of being able to rattle the guy next to you when he is bumping his walmart system is pretty much out of the question.

so i would say its time to start looking into sounding good.

 

[Bassin Brandon]

would those 13tw5s fit under my front seats!?!?!?

 

[LosIsATool 5,000+ posts]

Rabbit.. Do you by chance know if those 13s will fit under a front seat. At the very least he would feel it.