ahole-ic
Banned
It's not better. You'd probably have to get 2 "y" adapters. You'd need single female double male. This will mix the signal. This sort of deal was good back when we used 2 channel amps for subs, but nowadays high end rca's are just marketing hype. There really isn't a lick of difference between them.
- Thread Starter
- #3
Cool, Thanks.
It's probably meant for Home Theater use. They are typically 1 chn. (going from receiver to sub amp.)
Activity
No one is currently typing a reply...
Similar threads
Many moons ago I was heavy into Car Audio Systems(Iasca stuff) but a ton of things have me removed and knowledge forgotten so I need a refresh.
I...
- Started by Grzldvt
- Wiring, Electrical & Installation
Those subs are 400w RMS each, and that dual enclosure is 800w RMS with a 2ohm load.
That's a 4ch amp that does 55w x 4 @ 4ohm, & 75w x 4 @ 2ohm...
- Started by Diy
- Wiring, Electrical & Installation
thanks DB, that definitely helps swallowing a $300 price tag 😂 these would essentially be running midbass for me too
- Started by spokey9
- Subwoofers
What is your budget? With being exposed to Rain.. I would recommend looking at a marine grade SAS Bazooka for the sub stage
- Started by Carlos_510
- Wiring, Electrical & Installation
Don't forget Hoffman's Iron Law. You can have 2 of the 3: low end, efficiency/sensitivity or small enclosure size...
- Started by kanihoncho
- Subwoofers
About this thread
New threads
-
-
-
-
Fuse Taps at 30amp with 16AWG....- Started by Paul Curtis
- Replies: 11
-