Sterero not working

[Nhb21]

I have a new 5 channel amp. All is connected and getting power, but there is no sound what so ever.

Click to read more...

 

[los33 10+ year member]

Have you checked your rca's or raised the gain a bit to check if there is any signal??

 

[Nhb21]

Yeah I have power to the rca's and my gains are at miideum turn. I'll turn it on and has a thump and scratch noise coming out of the sub

 

[Nhb21]

Thinking it may be wiring harness going bad

 

[los33 10+ year member]

You have a sub connected to your 5 channel amp?

A wiring harness will not cause this if the headunit is working unless you mean there is a wire harness on the amp?

It would be easier to take a photo to show how your setup is installed.

 

[Nhb21]

Yeah it's connected to the amp, maybe there is a short somewhere?

 

[los33 10+ year member]

Yeah it's connected to the amp, maybe there is a short somewhere?

If its making a scratchy noise or any unwanted noises then something is not connected correctly.

 

[Nhb21]

Even if it started playing for few minutes? Been messing with all evening and got it to play correctly for a few minutes then it went off again.

 

[los33 10+ year member]

Even if it started playing for few minutes? Been messing with all evening and got it to play correctly for a few minutes then it went off again.

Is it going into protect mode.

Also lower all the gains and make sure all speaker wires are connected to the correct spots and also check all speakers.

 

[Nhb21]

I'm not sure. How would I know? Yeah I can check the connections again and lower the gains

 

[Savackz]

Easiest thing to do is take a picture of all inputs and post it here so that we can see if everything is hooked up correctly.