Set gains w/ dmm, not enough powaaaa, what now?

[NoCoSPL 10+ year member]

Um NO! He said his LPF is set at 50hz. That's WAY too low and depending on it's cutoff curve, it's most likely dipping in to the 40hz range. Open that bish up to about 80hz and thank me later.

I don't like high frequencies. //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

 

[NoCoSPL 10+ year member]

So boosting my sub out shouldn't affect clipping?? Or?

 

[infamous_e46 5,000+ posts]

more cowbell

 

[ciaonzo 5,000+ posts]

more cowbell

Fukkin' right moar cowbell.

Set your SSF at 50, set your low pass at 50 (looks like this ^), crank the bass boost and your gain all the way to the right. Set the sub output from your HU to max, set your bass to max, set the loudness control to ON, set your volume to max.

Enjoy.

Edit- That's what I get for trying to be funny.

 

[Xprime4 10+ year member]

Fukkin' right moar cowbell.

Set your SSF at 50, set your 50 (looks like this ^), crank the bass boost and your gain all the way to the right. Set the sub output from your HU to max, set your bass to max, set the loudness control to ON, set your volume to max.

Enjoy.

is that what we call a sq system?

i think so

 

[Stalin-ohaulic]

I ran mine around 60:fyi:

FYI that's great it's not applicable.

 

[dman4486 5,000+ posts]

FYI that's great it's not applicable.

****?

 

[Stalin-ohaulic]

I don't like high frequencies. //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

Well your crossover doesn't just cut off right at the frequency you set it at. It falls off a little the farther away from it the frequency is. This means that the reason you're getting reduced output is that the crossover is filtering your peak frequency a little.

 

[Stalin-ohaulic]

****?

yes please

 

[dafobbishon3 10+ year member]

low pass 80. sub sonic 20 bass boost 0 gain 1/2.

goodnight.

 

[AudioAnonymous 10+ year member]

u might need a line driver signal might be week to push both amps

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[DBfan187 5,000+ posts]

use a -10dB tone