j_alexander 10+ year member
Senior VIP Member
So a friend of mine had some eclipse components and tweets sitting around so we decided to replace my of so shitty pioneer stocks, they were a disgrace to say the least. its a simple project really but the car is so small its tough to run wires anywhere especially through the doors! its a good little rice burner though gotta love 35 mpg //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif anyway heres a few pics of what we got accomplished today.
in the top picture the eclipse is on the right versus the stock and in the second the eclipse is on the left, just showing the differences in the motors.
the top photo just shows where we ran the wire nothing major we used 8 guage monster cable for the power wire. the amp shown is just a temporary one til the new 100x4 comes, the one pictured is and old punch i had laying around.
this is just to show how crappy the stock tweets where, they're on the left eclipses are on the right.
showing the door panels all torn off, they were ver simple to take off two screws out disconnect the plugs and pop em right off. thanks to the help of my good frind spenman.
in the top picture the eclipse is on the right versus the stock and in the second the eclipse is on the left, just showing the differences in the motors.
the top photo just shows where we ran the wire nothing major we used 8 guage monster cable for the power wire. the amp shown is just a temporary one til the new 100x4 comes, the one pictured is and old punch i had laying around.
this is just to show how crappy the stock tweets where, they're on the left eclipses are on the right.
showing the door panels all torn off, they were ver simple to take off two screws out disconnect the plugs and pop em right off. thanks to the help of my good frind spenman.