Removing deadening ***** balls

[Skip01 5,000+ posts]

Dry ice and a chizel.....next question

 

[duece212 5,000+ posts]

Dry ice and a chizel.....next question

will you come up here and do it for me?

 

[mm0142 10+ year member]

mabee its just me but why not just cut out the holes for the access holes and leave the rest on the doors?

 

[ChanzSafari 10+ year member]

Yeah, I had a crappy experience one weekend. Rear door latch cables stretched and the cargo door wouldnt open on my tahoe. 22 cube box in cargo area + 30 sq ft of dynamat extreme on the cargo door to pull off to get to the cables = //content.invisioncic.com/y282845/emoticons/mad.gif.c18f003ab0ef8a0d9c27ca78d77a6392.gif I have never been so mad.

 

[duece212 5,000+ posts]

mabee its just me but why not just cut out the holes for the access holes and leave the rest on the doors?

I wish I would have just put deadening over the access holes, but I covered the access holes with flashing, covered by deadening, then by another layer of deadening. So I have to pull some deadening back to get to the screws holding the flashing on, same deal on the back wall where I had blocked off the cab vent holes. I'm leaving the deadening on most of the door and backwall...no way I'd be removing all that ****, no need to.

Yeah, I had a crappy experience one weekend. Rear door latch cables stretched and the cargo door wouldnt open on my tahoe. 22 cube box in cargo area + 30 sq ft of dynamat extreme on the cargo door to pull off to get to the cables = //content.invisioncic.com/y282845/emoticons/mad.gif.c18f003ab0ef8a0d9c27ca78d77a6392.gif I have never been so mad.

That ***** man. I don't want a buyer not into audios running into a situation like yours then taking off the door panel on my truck and wondering wtf //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

Imagine how mad you'd be if you didn't put the deadening there in first place and had no idea it was there when you bought it //content.invisioncic.com/y282845/emoticons/mad.gif.c18f003ab0ef8a0d9c27ca78d77a6392.gif

 

[fatboyracing 10+ year member]

use gas to cut the goo worked good for me

 

[chase007 10+ year member]

Liquid nitrogen freeze that **** at -800 hit it with a hammer

 

[duece212 5,000+ posts]

use gas to cut the goo worked good for me

I just have one door left to open up the access holes. I have a ball of butyl I'm using to pick up any deadener that doesn't up clean, seems to be working good so far. Luckily none of the deadener is in an exposed spot of the interior so it doesn't have to look 100%

I smoke while I work alot, so the gas might be a bad plan...haha

 

[Skip01 5,000+ posts]

will you come up here and do it for me?

haha...ill come up there and wipe ur ****** tears from this thread......//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

Mann....we do need more sellers like you though...be a lot less headaches in the world //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[duece212 5,000+ posts]

haha...ill come up there and wipe ur ****** tears from this thread......//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif


Mann....we do need more sellers like you though...be a lot less headaches in the world //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

Enough talk about you wanting to wipe my gina //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif

Just about done, hasn't been bad really, I just like to ***** alot. Hard part now is trying to remember where my seatbelts bolt to the floor in the back...took it out over a year ago and I have problems remembering yesterday let alone a year ago //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif