Pair of Dual 4 ohm 8's

[AnthonyO 10+ year member]

Like the title says. Looking for a pair of dual 4 ohm 8's RMS 5-600 watts

Click to read more...

 

[trumpet 5,000+ posts]

How much do you want to spend?

 

[AnthonyO 10+ year member]

All depends on the sub.

 

[AnthonyO 10+ year member]

They need to like 1.5cu.ft ported

 

[AnthonyO 10+ year member]

Anyone have any experience with Sundown E8's. Will the .75 per sub ported work?

 

[tymoto21 10+ year member]

I've played a bunch with sa 8's and they do well in .5-.75 per

If you are light on the power .75 all the way up to 1 per will work well

 

[AnthonyO 10+ year member]

I've played a bunch with sa 8's and they do well in .5-.75 perIf you are light on the power .75 all the way up to 1 per will work well

Running a Twisted Sounds 1kw.

 

[AnthonyO 10+ year member]

How much do you want to spend?

Let's say $150-225

I can get DD608's for $218 NIB might go that route if I can't find anything else

 

[trumpet 5,000+ posts]

The power range of 500-600W RMS makes this tough. I see DD as their power rating for 608 published as a range from 300W - 600W. If you want a beefier 8 I believe I can do a pair of American Bass VFL8s in dual 4.

 

[babsuhl81 10+ year member]

Text me Anthony o. 2175219236. I can't upload pics on here

 

[babsuhl81 10+ year member]

I have a pair of g&s motor d4 direct leads 8s. They are in 1.5 @ 39 Hz and sound good Was on an arc xdi1000.

 

[AnthonyO 10+ year member]

ttt

 

[The_Dealer]

OP, take a look at the CT Sounds Hydro. They're around $75 each and I wouldn't hesitate to run 600-700w each (clean). They sound really clean, can handle a good bit of power, and mine had no problem playing down to the lower 20's.

Sent from my SM-G900A using Tapatalk

 

[AnthonyO 10+ year member]

Going tomorrow to local dealer and looking at son DD 508, 510, 608, 610 and a set of Skar VVX8

 

[AnthonyO 10+ year member]

No longer needed. Purchased two DD 608's

 

[macsdad 10+ year member]

I ran a pair of those 608s, in 1.68cuft at 30hrtz at 1ohm on a saz1500v3 and they were very impressive dude. You should be very pleased with the outcome. I know I was.