Orion 2500d owners i need ure help...

[walkychalky 10+ year member]

actually, after taking a closer look at a picture of a jl amp i see why the did that......instead of the terminals looking like this (+ - + -) like they do on the orion..the look like this (+ + - -)

 

[bizzy07 10+ year member]

could the speakers be out of phase from eachother? im just suggesting this because earlier he said that the subs moved but there was no output

 

[Ctminime 10+ year member]

could the speakers be out of phase from eachother? im just suggesting this because earlier he said that the subs moved but there was no output

anything is possible that i made some dumb mistake somwhere... that is why i am going to rewire all of it tommorow. double and triple checking everything...

 

[bizzy07 10+ year member]

i had that problem when i first got my new setup and the speakers would move like crazy and as soon as i rewired it was about 5000 times better lol

 

[80INCHES 5,000+ posts]

to give u guys the scoop on my amp

it may not be the 2500d but my 1200d has the same buttons

my gain was set with my dmm to 34.8volts

my lpf is at 80hz

my hpf is at 20hz

my intelli q is at 6

and my 2 se12's sound really really good

80

 

[60ndown 10+ year member]

i guess its possible 1 of the subs is marked incorrectly, try connecting just 1 sub first and if connecting the 2nd sub makes the bass go away, then reconnect the 2nd sub with wires reversed.