Noob in need of a box design

[5tuntm4n]

Hi guys

Typical noob question/request I'm affraid!!//content.invisioncic.com/y282845/emoticons/redface.gif.62fdbfe1a101588a808c4cff71bcb942.gif

I've recently got myself an Alpine Type R 12 (SWR1240) and am looking for a box to house it in.

It needs to fit in the fairly shallow boot of a Mk 2 Honda CRX, the dimensions of which are as follows; 700mm/27.5in wide, 600mm/23.5in deep and 350mm/13.25in high. Ideally I would like the box to take up no more than around half of that space.

I mainly listen to breakbeat and hip-hop at the mo', although I have a very eclectic taste in music and would like a design that would be slightly biased towards SQ, but would also like it to drop nice and low too (don't we all)

Here's the spec for the sub from the Alpine website:

Size: 12"

Impedance: 4Ω

Power Handling: 300W RMS/ 1000W Peak

Frequency response: Fs~1kHz

D.C. Coil Resonance (Re) 3.6Ω

Inductance (Le) 1kHz/20kHz: 2.38mH/0.85mH

Free Air Resistance (Fs): 26Hz

Equivalent Stiffness (Vas): 66L

Qms/Qes/Qts: 10.39/0.38/0.37

X max/ X peak: 12.9mm/25.8mm

Mechanical excursion (P-P): 55mm

Gap/Coil height (Hag/Hvc): 10mm/35.8mm

Cone area (Sd): 467.59cm²

Diaphragm Material: Kevlar reinforced pulp

Spider material: Nomex

Magnet weight: 89.4oz

Voil coil diameter: 50mm

Recommened sealed box volume: 0.7~1.0 1^3

If any of you good people could point me in the right of direction to getting myself a nice design to make the most of this sub, I would be very grateful!!//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Click to read more...

 

[wlmrs 10+ year member]

Go to the thread 3 above yours.JMAC designs enclosures

 

[woody89 10+ year member]

Good luck finding someone to do that for free.

 

[Pyro_By_Nature 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Moe Lester 10+ year member]

I do designs for $6 in 2D and $10 for a 3D to scale rendering.