I have an Alpine SWR-12D4 subwoofer and an Alpine MRX-M110 amplifier and I wanna change my factory speakers. First I don't wanna spend on a second amp (they will be driven by the headunit only) and second, I would like to have very good mids and not too sharp/strident highs. I was looking at the Infinity 6032cf and the Polk Audio db651, but it can be anything else. I would like to have your suggestions. Thanks.
-
3Participant count
-
Participant list
pickup1 5,000+ posts
CarAudio.com Veteran
Polks are nice,haven't heard the others...
basswiigee
CarAudio.com Veteran
I got a pair of bravox 6.5 carbon fibers for like 60 from parts express they surprised me, good lil speakers
Activity
No one is currently typing a reply...
Similar threads
The 8's have a frequency response of 40hz and up. So I would cross them over at 60hz and up. And crossover my subs at 80hz. That way I would get a...
- Started by Doxquzme
- General Car Audio
They have pre-cut wood if you pay extra at the hardware store. Just draw it out. But you'll have to pay extra. Then screw it in yourself...
- Started by Blackout67
- Subwoofers
Speaker ratings are generally a thermal/mechanical limitation of the drivers. Music is dynamic, not continuous. During quiet periods a song, you...
- Started by kanihoncho
- Speakers
It also lowers the amps efficiency and raises the current draw.
- Started by Paul Curtis
- General Car Audio
About this thread
Latest topics
-
-
-
OFC vs CCA for wiring amp to car and for speaker use . . .
- Started by kanihoncho
- Replies: 5
-
Suggestions on 6 channel amp/powering 3 way active front stage and driver selection.- Started by JoeMama541
- Replies: 5
-
suggestion of which Butyl Automotive Sound Deadener Mat?
- Started by slater
- Replies: 13