Nexus tablet install help!

[Davey]

Hi all.

I have a mk1 mx5 that I'm in the very final stages if installing a gen1 nexus 7 tablet. I'm having an issue with the final connection.

So far I have a hard wired power feed from the battery (piggy backing fuse) at 2 amp which powers a 3 port OTG USB hub. Attached to the hub I have a dvbt usb (to receive fm signal) and a digital audio converter (turtle beach) that links to an amp.

The hub has a straight connection which I need to change for a right angled one to allow access behind the centre console.

I was assuming it would be a straight cut and solder job but the otg hub has 5 wires and the right angled head only has 4. What is the extra yellow cable for and what should I do with it to make the new head work?

View attachment 26554455View attachment 26554456

Thanks in advance.

Dave

Click to read more...

 

[Dustin_Kimble]

http://forums.androidcentral.com/google-nexus-7-2012-accessories/200856-diy-making-your-own-otg-cable-image-heavy.html

If it were me, I'd get a right angle otg cable at this point.

Sent from my Nexus 6 using Tapatalk