NEW SUB! Need to build a box!!!!

[CarAudioNewbie9 10+ year member]

So I just ordered a NEW 15" Cadence Wild Beast!!!! I talked to the guy that sold them to me and he told me that they are made for sealed boxes because they have heavy cones. He said that they can easily take 1000 RMS. Now I need to build a box. But I have no idea how big it should be. Can someone calculate cubic feet for a new sealed box? I want these to hit as deep as they can!!

Size: 15"

Voice Coil: 3" Four Layer

Impedance: 4 ohm single

Power Handling: 750 RMS/1500 PEAK

Frequency Resp: 20-500Hz

Magnet Size: Double stacked 150 oz

SPL @ 1W/1M: 95dB

X-max: 1.18" peak to peak

Mounting Depth: 7.9"

Z=26.38

Fs=21

Pe=600

SPL=90

Re=2.95

Le=2.2185

BL=17.79

Xmax=0.015

Cms=0

Qms=4.39

Qes=0.5532

Qts=0.49

Sd=8.35E-6

Vas=128.8

Type=0

Click to read more...

 

[mclerico83 5,000+ posts]

they are made for ported i had 4 in my car, i have ran almost all cadence equipment before and know tony, roy etc, they want ported only

 

[ciaonzo 5,000+ posts]

they are made for ported i had 4 in my car, i have ran almost all cadence equipment before and know tony, roy etc, they want ported only

Divide 21 by .553 and post the answer.

 

[CarAudioNewbie9 10+ year member]

bump. come on guys.

 

[mclerico83 5,000+ posts]

http://www.cadencestore.com/cadence_manuals/WILDBEAST%20COMPETITION%20BOX%20CHARTS.pdf

 

[mclerico83 5,000+ posts]

thats the competition charts for daily inside the box if their new you will see this chart and the main manual will till you 2.5 at about 38hz and thats for daily driving

 

[mclerico83 5,000+ posts]

if you use the competition one use the 3.0 and tuned to 45, but 4 daily id go 2.5 38

 

[CarAudioNewbie9 10+ year member]

I wanted sealed folks. lol

 

[Ray21 10+ year member]

Win ISD -----> Download it!

T/S Parameters ------> Enter them

.7 qtc --------> What you want!

Build the **** thing!

Now you won't have to be spoon fed!

//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[mclerico83 5,000+ posts]

Win ISD -----> Download it!T/S Parameters ------> Enter them

.7 qtc --------> What you want!

Build the **** thing!

Now you won't have to be spoon fed!

//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

dont sound good sealed but g/l

i will enter the subs for you and see what winisd says in about an hour

 

[CarAudioNewbie9 10+ year member]

It says I need a 8.641 cubic feet box tuned at 17.21. That is a ****ing massive box.

 

[Ray21 10+ year member]

I wanted sealed folks. lol

It says I need a 8.641 cubic feet box tuned at 17.21. That is a ****ing massive box. l

:facepalm:

Looks like you didn't calculate for a sealed box if its tuned to 17.21hz.

If I had Win ISD on this comp I'd help ya out, but try running it again...

 

[CarAudioNewbie9 10+ year member]

No I think I am going to do ported but I have no idea what I should tune it at.

 

[CarAudioNewbie9 10+ year member]

So after some fooling around with Win ISD, I think I want to def go ported. Only thing is now, what do I want to tune the box at? I want it to hit DEEP but still retain good SQ.

 

[CarAudioNewbie9 10+ year member]

If I tune it at 20hz it stays pretty flat until 30 hz.