Need the perfect subs, help? :D

[kevinb 10+ year member]

sir please add a battery in the back g31 preferrable and check the coils for yourself and report back promptly please....

this just in, the coils are f*cked

 

[csu87 10+ year member]

oh i know im not seeing 2,000 that goes without saying..
but why doesnt it sound fine?

Just my experiences, but once an amp goes into protect it usually is bad or going bad. Open it up and see if there are any burn spots

 

[dB-SPL 10+ year member]

oh i know im not seeing 2,000 that goes without saying..
but why doesnt it sound fine?

Usually when you're using a higher power amplifier without an eletrical system to back it up, the amp will still try to push the power to the speaker (the power it doesnt have with a stock electrical) thus clipping amp all the hell at full tilt none the less.

 

[GMCJimmyslt2000 10+ year member]

Op is a dumbass and I call bs.

1. First the sub is blow. Than he says the amp is fried, with only a slight burnt coil, which is causing the amp to be fuked. Bro, get ur shit straight.

2. No shop would charge 400$ just to set the gains.

Sh it just doesn't add up, or he's jst fukin really dumb and ppl are taking him for $$.( which I would do too cuz this guy is a complete tool).

 

[pawn man 10+ year member]

either the box tuning was way wrong or you were clipping the hell out of that amp. those subs will take alot more power than that. we were running a 40.1 @ .5 ohms on a pr with no problems.

 

[eggyhustles 10+ year member]

2. No shop would charge 400$ just to set the gains.

if they see a dumbass walking in? sure they would