Need some help with sub choice for shallow mounting depth

[stonedge 10+ year member]

Hi guys, just picked up a new tundra double cab. Need to throw something in so I'm coming here for suggestions. I'm looking at a custom box that is 2.1cu ft slot port tuned to 35hz for 2 10" subs. Mounting depth is 5". Normally I would build a box but it would be an absolute pita in this setup.

I've been out the game for almost 5 years and currently run an IDMAX 12 v3 2.6 cu ft tuned to 30hz off a pg ti 600.2 in the car.

I have 2 amps at my disposal

the PG ti 600.2 or the ti 1000.2 sitting on the shelf.

Looking for more of an sq/sql setup (i hope I can customize the box a little)

So I'm looking for shallow mount subs more sql if possible. Can you list a few that fit the bill? Greatly appreciated.

Click to read more...

 

[Team Maxxsonics 10+ year member]

MBQUART RLP304: 12" DVC 4-Ohms / 3" mounting depth / .5 to .75 cubic feet

MBQUART RLP254: 10" DVC 4-Ohms / 3" mounting depth / .35 to .5 cubic feet

Excellent sound quality!

 

[mossberg385t 10+ year member]

SClass Subwoofers from Memphis Car Audio

supposedly the best shallow mount out there, but it could just be because it has the memphis name on it

 

[loud-n-low 10+ year member]

you will be losing some low end compared to your current idmax setup with the 35hz tuning you are looking at(more than likely)

 

[stonedge 10+ year member]

Yeah I realize that, should of been more clear when I said I wanted to customize the box a little i.e. tune a bit lower. Memphis and mbquart, thanks for the opinions I'll have to do some research on them. Anyone else with input? Appreciate it thanks!