Need opinions on system install problems

[DirtyDief]

I just moved my system over from my old 4runner to my 95 Pontiac Bonneville. I already had a 8gauge power, remote, ground and rca wires in the bonneville. i put my Coustic 401s amp and Audiobahn 1200T 12" sub in the car with the old wires and everything worked. Then i moved over my 2nd amp wires, a 4 gauge, spliced the remote, and have a second rca. i want the 4 guage going to my sub, and i want the 8 gauge going to my 2nd amp, a power acoustic 4 channel. I doubled up on the ground so 2 grounds on the same screw going to 2 amps. It didnt work then i messed around w the ground. THe amps always powered w no problems, but nothing is coming out of the speakers. Ive checked the rca's in the head unit and nothing is wrong. I need to redo the grounds.

If any1 has any suggestions please reply cuz i am having no luck and im really pissed

Click to read more...

 

[80INCHES 5,000+ posts]

sound like voltage problems......how big is the power wire from the batt 2 the distribution block(u should have one if u are doing multiple amps)

80

 

[johnecon2001 5,000+ posts]

sounds like a bad ground, not a power issue. He has the protect light on, so obviously the amps are getting power. Try regrounding them to a completely different spot, and maybe only do one at a time to make it simpler to troubleshoot.