need lots of help please.

[osiris999 10+ year member]

whats getting me is that that both sets of power ground tun on say input. some people say the second is for a second amp.

 

[3.5Max6spd 10+ year member]

it was 350. everything looks new all factory packing and books etc.

They usually do- I'd go and have it tested out- 1600rms from a top of the line Soundstream for $350- these aren't Hifonics amps, these are much more expensive.....

 

[req 5,000+ posts]

maybe, just maybe it has 2 power supplies, requiring more than one input.

how about, reading the manual, and looking to see if it requires TWO power, TWO ground wires and TWO REM wires? sorta like the TRU SH-1 (seen below)

that would be my guess.

//edit

this is your amp, correct?

they go for ~$350 online (not sure if they are authorized however)

without seeing the manual. i would not be able to tell. looks like two inputs tho.

 

[LIGHTBEING 10+ year member]

Here't the Manual:

http://www.soundstream.com/sub/owner_manual/OWNER%27S%20MANUALS%20AMPLIFIERS/Van%20Gogh%20amps/VGA-manual.pdf

Can it be the ATT switch?

 

[osiris999 10+ year member]

i messed with the att switch but its still not loud. both sets of power ,ground, turn on say in put so it problly has 2 power supplys. but the book doesnt help at all

 

[LIGHTBEING 10+ year member]

Call up Soundstream and then tell me for my install //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[osiris999 10+ year member]

ok i called soundstream and they said you only use one set. the only thing the guy said it might be that the rca singnal isnt strong enough and i may need to boost it

 

[osiris999 10+ year member]

would running the rcas next to the power wire have any effect?

 

[osiris999 10+ year member]

ok problem fixed what i thought was bare metal wasnt so it wasnt grounded good

 

[3.5Max6spd 10+ year member]

ok problem fixed what i thought was bare metal wasnt so it wasnt grounded good

So is it crankin? //content.invisioncic.com/y282845/emoticons/clap.gif.178cba2c538c68e720c727fcb024b19c.gif

 

[pks71 10+ year member]

good!

 

[luckiebrand13 10+ year member]

alright good deal man. glad to hear that your system is up to par. it always sucks when you get everything, spend hours of time on the install, then turn it on and.... nothing. i always hated that and usually it was the simplest thing that was keeping it from functioning properly.

 

[osiris999 10+ year member]

yea thanks to everyone for the help. its alot louded now. the only thing is i thought i would feel bass pounding into my chest but it doesnt. i used the box on res site so thats problly the problem. im makeing a new box soon. so ill let you know if it gets better. now its time to wait till next wed. for the adire koda6.1 components to come in.

 

[LIGHTBEING 10+ year member]

Awesome man, Yeah the XXX should definitely pound with a VGA1600.2. Let us know what you think after your new box.

 

[LIGHTBEING 10+ year member]

Oh and any dimming? What size is your Alternator? Did you do the Big 3?