Need help installing 2din multimedia on 2012 Yaris

avi

CarAudio.com Newbie
Dec 6, 2018
2
0
Hi

I own a 2012 Toyota Yaris (model NSP130) and I would like to install a double din unit that I've purchased from China. I want to install it without making any alterations in the vehicle harness, so I've purchased the two connectors that are supposed to match the connectors on the original harness. if I got it right, one connector is the radio (voltage and the speakers) and the other one is for the steering wheel controls. so, what I need to know is the function of each wire, so that I will be able to make the connections to the connector that was supplied with the new HU. 

Thanx  

 

hispls

CarAudio.com Veteran
Sep 10, 2009
10,725
219
Cape Cod, Massachusetts
Hi

I own a 2012 Toyota Yaris (model NSP130) and I would like to install a double din unit that I've purchased from China. I want to install it without making any alterations in the vehicle harness, so I've purchased the two connectors that are supposed to match the connectors on the original harness. if I got it right, one connector is the radio (voltage and the speakers) and the other one is for the steering wheel controls. so, what I need to know is the function of each wire, so that I will be able to make the connections to the connector that was supplied with the new HU. 

Thanx  
There should be instructions in/on the package with the aftermarket wiring harnesses. 

 

avi

CarAudio.com Newbie
Dec 6, 2018
2
0
Thanx for the swift response, however my question was regarding the wires on the vehicle original harness, what is every wire's function?

As per the aftermarket HU - unsurprisingly, there is no manual supplied with it, only a picture showing the wires on the connector labeled with their function (batt, gnd, acc, speakers and so on). btw- I guess that it should be connected to the batt (+12v) constantly and to the gnd and then connect the "acc"  to the +12v in order to turn it on.