simple box
can be up to 38 inches wide, subs on either side, port in the middle.
2 Fi SSD 10s with Coppers and a zx1500.1(hopefully)
38hz, 2.5-3ft^3
17 inches tall max, keep it as short as possible
11-12 deep.
smaller the box the better dimension wise, still maintaining airspace and freq.
subs and port firing up, like so:
(oolldd box: took a 20lb sledge to it)
except with port in the middle. EDIT: would like port to be bigger than 3in, preferably around 4 or bigger if can be done.
if at all possible, would like to keep only 2 port walls. one on each side straight down into the box. but if i absolutely have to, i can L it out:
can be up to 38 inches wide, subs on either side, port in the middle.
2 Fi SSD 10s with Coppers and a zx1500.1(hopefully)
38hz, 2.5-3ft^3
17 inches tall max, keep it as short as possible
11-12 deep.
smaller the box the better dimension wise, still maintaining airspace and freq.
subs and port firing up, like so:
(oolldd box: took a 20lb sledge to it)
except with port in the middle. EDIT: would like port to be bigger than 3in, preferably around 4 or bigger if can be done.
if at all possible, would like to keep only 2 port walls. one on each side straight down into the box. but if i absolutely have to, i can L it out:
