soloXgt 10+ year member
Dinkum Flicka
What I have here is motor from a prototype from Protech. Lookin to get what the title states, but not 100% sure what basket/cone would fit it. Needs a 3" coil. (Inner diameter of vent pole is 2.9", and outer diameter before it hits magnet is 3.33") Six bolt pattern each spaced 2.5" between each bolt center to center. Motor is also XBL^2 and was built by adire. (don't know if it makes a diff.) if you need anymore information, let me know. I you have any ideas on what basket/cone would fit this, im up for anything. Wouldn't mind opinions on 10, 12, or 15". (I know there is still VC in there, I still gota clean it out.)