_sF^
Junior Member
sinful flesh's car stero wish list
powerful , nice sq, while still retaining the bang-for-the-buck mindset! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
mids in doors, tweets mounted in pilars
Head Unit
----------
Rockford Fosgate RFX9000
(soon to be replacing with a Panasonic CQ-DF903U)
Component Amplifier
----------
Hifonics Zeus Z6000
2x150 Watts @4 Ohms
2x300 Watts @2 Ohms
1x600 Watts @4 Ohms
price: $229.95
Components
----------
Infinity KAPPA 60.5CS
6.5" component set
Ceramic Metal Matrix Diaphragm Plus One woofer cone
1" C.M.M.D. dome tweeter can be flush-, surface-, or angle-mounted
hi-roll rubber surround
2-way crossovers (high-pass/low-pass at 3500 Hz, 18 dB/octave)
frequency response 45-21,000 Hz
power range 2-90 watts RMS
peak power handling 270 watts
sensitivity 90 dB
top-mount depth 2-3/16"
Price: $146 from hookedontronics.com
Subwoofer Amplifier
----------
US Acoustics USX600D
Amplifier Type: Mono
RMS Power: 250W x 1 @ 4 ohms
RMS Power: 375W x 1 @ 2 ohms
THD at Rated RMS Power:
Speaker Level Inputs: No
Preamp Outputs: Yes
Built-In Crossovers: LP
Bass Boost: 0 or 10 dB
Frequency Response: n/a
Channel Separation: n/a
Signal to Noise Ratio: > 80 dB
Fuse Rating: 20 amps
Sale! $169.95 on sounddomain.com
Subwoofer
----------
Elemental Designs 8A.44
Freq. Hz: 20-300
Power: 50,450,550 (Max... at 2 Ohms (Dual 4Ohm voice coils wired series / parallel)
Price: $165 from edesignaudio.com (direct)
Total Price: $710.90
I might change my decision on the sub amp, since it still won't fully power the ed8A.44, although I'm sticking all of this in a Regular Cab 1999 Ford Ranger, so I really don't NEED to fully power it //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
Box I'm building to the reccomended sealed blueprints from ED. It's nice to have your own power tools =]
powerful , nice sq, while still retaining the bang-for-the-buck mindset! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
mids in doors, tweets mounted in pilars
Head Unit
----------
Rockford Fosgate RFX9000
(soon to be replacing with a Panasonic CQ-DF903U)
Component Amplifier
----------
Hifonics Zeus Z6000
2x150 Watts @4 Ohms
2x300 Watts @2 Ohms
1x600 Watts @4 Ohms
price: $229.95
Components
----------
Infinity KAPPA 60.5CS
6.5" component set
Ceramic Metal Matrix Diaphragm Plus One woofer cone
1" C.M.M.D. dome tweeter can be flush-, surface-, or angle-mounted
hi-roll rubber surround
2-way crossovers (high-pass/low-pass at 3500 Hz, 18 dB/octave)
frequency response 45-21,000 Hz
power range 2-90 watts RMS
peak power handling 270 watts
sensitivity 90 dB
top-mount depth 2-3/16"
Price: $146 from hookedontronics.com
Subwoofer Amplifier
----------
US Acoustics USX600D
Amplifier Type: Mono
RMS Power: 250W x 1 @ 4 ohms
RMS Power: 375W x 1 @ 2 ohms
THD at Rated RMS Power:
Speaker Level Inputs: No
Preamp Outputs: Yes
Built-In Crossovers: LP
Bass Boost: 0 or 10 dB
Frequency Response: n/a
Channel Separation: n/a
Signal to Noise Ratio: > 80 dB
Fuse Rating: 20 amps
Sale! $169.95 on sounddomain.com
Subwoofer
----------
Elemental Designs 8A.44
Freq. Hz: 20-300
Power: 50,450,550 (Max... at 2 Ohms (Dual 4Ohm voice coils wired series / parallel)
Price: $165 from edesignaudio.com (direct)
Total Price: $710.90
I might change my decision on the sub amp, since it still won't fully power the ed8A.44, although I'm sticking all of this in a Regular Cab 1999 Ford Ranger, so I really don't NEED to fully power it //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
Box I'm building to the reccomended sealed blueprints from ED. It's nice to have your own power tools =]