MTX 9500 Box Build!!!

[TooLowTooGo 10+ year member]

ok 2nd coat

Pictured in image is the box, port wall, and the top

behind me is the front... sucks working on a porch. kinda feel bad for the neibor below, haha

ok and for those who were wondering y i taped the holes.

it should be self explanitory, but some ppl prolly dont know

it hardens int he hole. and now u can make a new hole or cover up ur f*ck ups. like im doing //content.invisioncic.com/y282845/emoticons/veryhappy.gif.fec4fed33b4a1279cf10bdd45a039dae.gif

will be doing a 3rd coat after i get back from chineese. and if it doesnt rain tomorrow will hit it with 1 more and then put this bad boy together

 

[TooLowTooGo 10+ year member]

ok not much was done yesterday because of the rain.

but i did manage to get the front, port n top on.

inside view

now with the top on. just looks like a table, lol

subs on to see how much room ill be expecting

 

[ramos 5,000+ posts]

Looks nice, quick suggestion. You can mix a hotbatch of resin, apply it over the resin that is taking for ever. And bother layers will dry alot quicker. Just don't mix it too hot it will crack like a beeyatch. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[TooLowTooGo 10+ year member]

Looks nice, quick suggestion. You can mix a hotbatch of resin, apply it over the resin that is taking for ever. And bother layers will dry alot quicker. Just don't mix it too hot it will crack like a beeyatch. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

thanks man, how would u make it hot tho? microwave or stove??

 

[TypeRBass 10+ year member]

thanks man, how would u make it hot tho? microwave or stove??

just put a crapload of hardener in it.....and work FAST FAST! i specialize in 1 minute resin //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif you know its a hot batch when it starts smoking and burns your eyes //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[PV Audio 5,000+ posts]

nice stuff //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[InhumanAcura 5,000+ posts]

looks good, try firing that port to the passenger side when you test. that resin might hurt your score though man..try it w/o and then with.

 

[TooLowTooGo 10+ year member]

hope the resin doesnt hurt my score to much. hope it gains...

anyway more pics

here it is holes cut and ready to be sanded

 

[TooLowTooGo 10+ year member]

ok RESIN time!!!

edges are all smooth and the exterior has a coat of resin applied

 

[TooLowTooGo 10+ year member]

looks good, try firing that port to the passenger side when you test\QUOTE]
the only way id be able to turn the port on the pass side would be if the port would be firing toward the front.

is this also what u suggest or nah?

 

[mikescanlon 10+ year member]

nice build, i work on my upstairs porch too : ) **** the nieghbors!

got any results on that box yet?

 

[TooLowTooGo 10+ year member]

no competition until sunday, and the guy isnt sure if the people are going to show yet

so if they dont and i drive 2 hours ima be pissed.

then after that the next one is the fall nationals in october

 

[btnhfan 5,000+ posts]

IMO, test before the bracing, and before resin.

Then do it with them in.

 

[snb778 5,000+ posts]

make sure you break those bad boys in before you go to a competition.

 

[TooLowTooGo 10+ year member]

IMO, test before the bracing, and before resin.
Then do it with them in.

to late ont hat, hahaha

o well. i have no bracing except the port and i already resined inside and out.. pics later tonight

no idea if im going to comp tomorrow or not cause the guy never called me to tell me its still on.