ARSkemp 10+ year member
FI-AQ-PA-AB-Profile-MB-RD
I was thinking about making a ported enclosure for a 12" FI SSD and was wondering if their is a minimum amount of space behind the sub that is recommended.
this around the enclosure size i was looking at:
http://www.subwoofertools.com/forum/ported-box.asp?Ew=38&Eh=16&Dia=6&Xmax=21&Vd=0.14&NumW=1&Vb=2&Fb=33&Qts=&Vas=&Fs=&CE=0
the sub has a depth of 6.5" and the depth in the box would be 7.25". Would i need more depth than that?
if i do need more depth is their a way to make the port like this:
http://www.subwoofertools.com/forum/ported-box.asp?Ew=38&Eh=16&Dia=6&Xmax=21&Vd=0.14&NumW=1&Vb=1.8&Fb=33&Qts=&Vas=&Fs=&CE=0
in the space i have for it?
I would prefer to have it take of a max of 16" H x 40" W x 12" D.
The Height and Width cannot be increased (if i can get it smaller that would be great) but i really want to make the depth as small as possible. (hoping for 10" but i dont know if thats possible). It would be a bonus if i can get the 40" W smaller too cause then i can put the amp on the side.
im basically trying to make the enclosure to the recommended on FI's website:
1.8-2.5 ft^3 @ 33hz (preferably ~1.8-2)
i really dont understand how the how port size/shape works so i don't know why the port in the top link is different looking then the one in the second link.
this around the enclosure size i was looking at:
http://www.subwoofertools.com/forum/ported-box.asp?Ew=38&Eh=16&Dia=6&Xmax=21&Vd=0.14&NumW=1&Vb=2&Fb=33&Qts=&Vas=&Fs=&CE=0
the sub has a depth of 6.5" and the depth in the box would be 7.25". Would i need more depth than that?
if i do need more depth is their a way to make the port like this:
http://www.subwoofertools.com/forum/ported-box.asp?Ew=38&Eh=16&Dia=6&Xmax=21&Vd=0.14&NumW=1&Vb=1.8&Fb=33&Qts=&Vas=&Fs=&CE=0
in the space i have for it?
I would prefer to have it take of a max of 16" H x 40" W x 12" D.
The Height and Width cannot be increased (if i can get it smaller that would be great) but i really want to make the depth as small as possible. (hoping for 10" but i dont know if thats possible). It would be a bonus if i can get the 40" W smaller too cause then i can put the amp on the side.
im basically trying to make the enclosure to the recommended on FI's website:
1.8-2.5 ft^3 @ 33hz (preferably ~1.8-2)
i really dont understand how the how port size/shape works so i don't know why the port in the top link is different looking then the one in the second link.