Looking for Something

[whitedragon551 5,000+ posts]

I need to find 4 gauge ring terminals with a 13mm or a 15mm hole size. Any idea where I can find some. Ive looked in all the obvious car website spots, amazon, ebay, etc. and cant find anything larger than a 1/2" hole. It has to be a .51" or a .59" hole, .5 wont work.

Click to read more...

 

[csu87 10+ year member]

try an auto parts store

 

[d-REW 10+ year member]

try home depot use a washer and should be ok look in electrical section i know they have them might not be the best but will work

 

[Loudman 10+ year member]

try home depot use a washer and should be ok look in electrical section i know they have them might not be the best but will work

X2 home depot!

 

[BeAlLsTaR13 10+ year member]

just make the hole bigger yourself use a drill bit to make it a little bigger .. i had to do it once :|

 

[whitedragon551 5,000+ posts]

Im not sure if I have a half inch drill bit laying around. Im pretty sure all the auto stores around here only carry the crap that people put on civics that add 5HP for every sticker they put on. They dont carry any high quality stuff.

 

[csu87 10+ year member]

the napa and carquest by me both carry pure copper terminals.

 

[whitedragon551 5,000+ posts]

Dont have a CarQuest here. I picked up some Lightning Audio 4 gauge ring terminals. I just used the bolts for the ANL fuse and put it through the ring terminal hole and modded the cap to allow for the fit.

 

[mlstrass 5,000+ posts]

Dremel is your best friend in situations like this or a step bit...

 

[whitedragon551 5,000+ posts]

I just used a band saw to cut off the over hang and used a small file to get inside and file it down.