Looking for 10" sub suggestion, requirements inside.

[Cruzer 10+ year member]

just modeled dayton ho 10 and polk mm 10, both are exact same as far as output in .61 off 200 watts. as for Sound quality i would probably go dayton but it prob costs a little more

dayton ho 12 winisd recommends .641 cubic foot, so its really close to the box size u have, 200 watts, its a little more output over the 10s but costs a little more

peerless xxls 10 madisound recommends .6 cubic foot, its rated for 175 watts rms, little more costly but according to winisd in .6 off 200 watts its actually louder than the dayton ho 12 and it will sound amazing for sure

Peerless 835016 XXLS 10" Aluminum Cone 4 ohm

 

[Zed03 10+ year member]

thanks for the suggestions, these are great. What advantages does the peerless have over the jl 10wx? is it worth 3x te price difference?

 

[Cruzer 10+ year member]

just the wx is a budget sub and has some good parts, but its not full blown like say the w6 for sound quality. the peerless is full blown, peerless doesnt offer a sub with more output or better sq, thats their full sub. like it would be better to compare the peerless to the w6 as far as sound quality goes.

choosing products, be it subs amps speakers all comes down to how much u wanna spend. wx will not sound bad

 

[Jason Brubaker 10+ year member]

Here is another optimum sealed enclosure is .65 and RMS is 250

Arc Audio