yuegling2982
10+ year member
jeep member
this took a real long time for me. its late and i am messed up, at least tell me if it sucks!
i have a nice 93 jeep wrangler. i have placed 4th and 2 3rds in jeep shows.
i would like to know if i made good choice with my small system.
some suggestion and feed back on all the equipment would be VERY nice.
lets start off up front i have a
Sony CDX-F5500 HU with 2 good 4’6” running of of it.
in the back i have 2 kenwood 6’9”s (,Frequency Response: 28Hz - 30kHz - Impedance: 4 ohms - - Power Handling: 250 Watts -- Sensitivity: 93dB - Speaker Connectors: Gold-Plated, with Glass Epoxy Circuit Board SPEAKER FEATURES - Midrange: 2-3/4" PEI Film Cone -Super-Tweeter: 13/16" PPS Film Dome - Tweeter: 1" PEI Film Banalced Dome ) with a Legacy LA460 600 Watt 2 Channel Amp hooked up to those.
lastly i have a Punch (10 inch, Power handling(RMS) - 150w, Power handling(Peak) - 300 Watts, Impedance - 8 Ohms, Sensitivity - 85.5 db, Vas - 50, Fs - 31, Qts - .524, Xmax - 7.7, Depth Bottom mount - 5.2 in., Cutout - 9.25 in., Displacement - 58.75 cu in ) that is hooked up to THUNDER 251D MTX CAR MONO AMPLIFIER 250W D-CLASS
it is hard to hear anything with the top off i would at least like to hear great sound
the 6’9”s are in a costom box sitting at least 6inch behind and either side of the sub.
also if i hooked up th front 4’6” to the 2 channel amp would that sound better?
i have a nice 93 jeep wrangler. i have placed 4th and 2 3rds in jeep shows.
i would like to know if i made good choice with my small system.
some suggestion and feed back on all the equipment would be VERY nice.
lets start off up front i have a
Sony CDX-F5500 HU with 2 good 4’6” running of of it.
in the back i have 2 kenwood 6’9”s (,Frequency Response: 28Hz - 30kHz - Impedance: 4 ohms - - Power Handling: 250 Watts -- Sensitivity: 93dB - Speaker Connectors: Gold-Plated, with Glass Epoxy Circuit Board SPEAKER FEATURES - Midrange: 2-3/4" PEI Film Cone -Super-Tweeter: 13/16" PPS Film Dome - Tweeter: 1" PEI Film Banalced Dome ) with a Legacy LA460 600 Watt 2 Channel Amp hooked up to those.
lastly i have a Punch (10 inch, Power handling(RMS) - 150w, Power handling(Peak) - 300 Watts, Impedance - 8 Ohms, Sensitivity - 85.5 db, Vas - 50, Fs - 31, Qts - .524, Xmax - 7.7, Depth Bottom mount - 5.2 in., Cutout - 9.25 in., Displacement - 58.75 cu in ) that is hooked up to THUNDER 251D MTX CAR MONO AMPLIFIER 250W D-CLASS
it is hard to hear anything with the top off i would at least like to hear great sound
the 6’9”s are in a costom box sitting at least 6inch behind and either side of the sub.
also if i hooked up th front 4’6” to the 2 channel amp would that sound better?
