LED wiring

its not something i recommend but you can gust hook pos and neg to speaker pos and neg. or you can buy a light control box but cheapest way is to just put the pos under the pos on the amp and neg on neg side of amp

but again i dont recommend it

 
yeah i was told when i got it not to hook the lights up to the amp. the box does have the plus and minus hookup for the lights i was just unsure of how to wire them the proper way and how to get them to pulse with the bass

 
its not something i recommend but you can gust hook pos and neg to speaker pos and neg. or you can buy a light control box but cheapest way is to just put the pos under the pos on the amp and neg on neg side of amp but again i dont recommend it
lmao! really? do you know what a car amplifier does? its in the name.... also totally dif type of current comes from the output section of an amp.

op dont do this, would be dumb anyways.

 
yah, you might as well plug them into a house recepticle if you do that. at least you won't fry the house outlet if the leds short the wires before blowing. really, if you want it to pulse, you need a controller, or swap them out for leds with sound response circuits built in. either way, they need to be on 12v dc....

 
see i got the box from a friend and he said to me that it has a switch where you can either keep them on constant or have them pulse the lights are built in and all but i dont know if he was right on the switch atleast i have yet to find one

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Signal flow should be HU to DSP to amps. You would lose the ability to EQ and time align the sub with the DSP unit if you bypassed the DSP.
1
101
Box rise, more accurately, impedance rise, is the reactive load changes the woofer exhibits at different frequencies and it will happen, it's...
4
367
thanks 1aespinoza for advice I decided to not use the blaupunk I got a real nice Pioneer.
2
313
Thanks for the input. Much appreciated. The dsp is an afterthought. I haven't installed anything yet but I put a budget system together. I already...
2
389

About this thread

noonbns

10+ year member
Junior Member
Thread starter
noonbns
Joined
Location
ickesburg, pa
Start date
Participants
Who Replied
Replies
7
Views
1,122
Last reply date
Last reply from
akheathen
IMG_0925.jpeg

GoldCountryCA

    Apr 26, 2024
  • 0
  • 0
IMG_0924.jpeg

GoldCountryCA

    Apr 26, 2024
  • 0
  • 0

Latest topics

Top