just hooked up the system....

[graffix989 10+ year member]

2 subs: AudioBahn AW1206T DVC(1100RMS)

1 amp: Lanzar VIBE268 (800x2 RMS @ 2ohm)

Total cost for EVERYTHING (box, wires, ect.) = $328

ok despise everyones rejections to buying this system i did it anyways and ive gotta say it thumps. for just over $300 it shook my friends rear view mirror who was parked next to me. i was suprised, cuz i realy didnt think the amp would push the subs so well. although my plan was in that buying subs that could handle twice as much as my amp is putting out so that i could virtualy double my system power by just getting a second amp. when i bridged the amp an hooked it up to one of the subs it lost alot of quality. i realy doupt its the subs, they are definatly in my opinion worth well over what i paid for em. but the amp however, is a good banger, but in the future im definatly going to upgrade to sumthin with a bit more quality.. its rated at 1000rms x 1 but it sounds more like 800x1. which was disapointing. however the subs are mounted in a generic prefab sealed 1.2cu/sub box. my next project is to get on making a good ported box for em.

Click to read more...

 

[Diplexers 10+ year member]

2 subs: AudioBahn AW1206T DVC(1100RMS)1 amp: Lanzar VIBE268 (800x2 RMS @ 2ohm)

Total cost for EVERYTHING (box, wires, ect.) = $328

ok despise everyones rejections to buying this system i did it anyways and ive gotta say it thumps. for just over $300 it shook my friends rear view mirror who was parked next to me. i was suprised, cuz i realy didnt think the amp would push the subs so well. although my plan was in that buying subs that could handle twice as much as my amp is putting out so that i could virtualy double my system power by just getting a second amp. when i bridged the amp an hooked it up to one of the subs it lost alot of quality. i realy doupt its the subs, they are definatly in my opinion worth well over what i paid for em. but the amp however, is a good banger, but in the future im definatly going to upgrade to sumthin with a bit more quality.. its rated at 1000rms x 1 but it sounds more like 800x1. which was disapointing. however the subs are mounted in a generic prefab sealed 1.2cu/sub box. my next project is to get on making a good ported box for em.

you meant to say "despite" not "despise".

 

[radel2dope 10+ year member]

Holy Balls man, you HAVE to get those in a ported box, or you will never know what they can do. Audiobahn strongly recommends a ported box for these. They didnt even release recommended sealed volumes for the 1208's. Anyway, although I dont know if I like the amp choice, I do like the high end Audiobahns, although many people here dont. I had one 1208T in 1.75 cubes ported, and it was VERY loud. and I was VERY happy with the $150 I spent on it. Anyway, I know you will love those so much more in a ported box

 

[graffix989 10+ year member]

ya, thx for the grammar lesson. lol the box is commin this spring, its tooooooo cold right now to even think about it. my fingers were numb after hookin all this up. but for now the only problem ive got is to figure out how to make my dashboard stop rattling...

 

[Sleeklsc 5,000+ posts]

Holy Balls man, you HAVE to get those in a ported box, or you will never know what they can do. Audiobahn strongly recommends a ported box for these. They didnt even release recommended sealed volumes for the 1208's. Anyway, although I dont know if I like the amp choice, I do like the high end Audiobahns, although many people here dont. I had one 1208T in 1.75 cubes ported, and it was VERY loud. and I was VERY happy with the $150 I spent on it. Anyway, I know you will love those so much more in a ported box

x2..i dont mind the mid to high end bahns...bud had 3 12" (i wanna say mid line) in a sealed triple 12 box and they sounded very nice..but that is with CERTAIN audiobahn subs..

 

[Termlab 10+ year member]

i'm sure the higher end audiobahn is ok, but i wont buy them //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif