Just finished install and...

[jdawg90 10+ year member]

my remote wire isn't hot. My head unit is a pioneer deh-6300ub.

Where should I start?

Click to read more...

 

[CAT MAN 5,000+ posts]

bypass it with a toggle switch str8 from the batt.

 

[winkychevelle 10+ year member]

the connection behind the radio.

it prolly came apart when u push the radio back in the hole.

 

[Ionakron 10+ year member]

the connection behind the radio.
it prolly came apart when u push the radio back in the hole.

I can't tell you how many times this has happened to me. Electrical tape ftw.

 

[mylows10 5,000+ posts]

the connection behind the radio.
It prolly came apart when u push the radio back in the hole.

^^^this

 

[09civic 5,000+ posts]

If you can op, solder or use crimp caps for your connections.

 

[Falcons 5,000+ posts]

make sure you hooked up the remote wire to to the amp turn on and not the antenna wire if there is one. they can both be blue.

 

[jdawg90 10+ year member]

fixed

had it hooked up to the factory wiring harness and the HU's remote wasn't plugged to the factory harness

 

[Falcons 5,000+ posts]

now begs the question, hows it sound??

 

[jdawg90 10+ year member]

not that good or loud. I think it's probably my music (not that much bass) and I need to tinker with the lpf/hpf more. And I still need to get some blank cd's so I can set the gain with a test tone.

2 sa'8s on a saz-1500d@1ohm

 

[fomoco365 10+ year member]

What kind of box are you using?

 

[Falcons 5,000+ posts]

not that good or loud. I think it's probably my music (not that much bass) and I need to tinker with the lpf/hpf more. And I still need to get some blank cd's so I can set the gain with a test tone.
2 sa'8s on a saz-1500d@1ohm

you should be killing it with that setup

 

[jdawg90 10+ year member]

It seems like my box is wayy off. Specs in just one second. It sounds like it's always below tuning.

 

[jdawg90 10+ year member]

I just realized the port is 2.25" wide instead of 2.5" for what it's worth. Oh yeah and theres no silicon on the speaker wire holes yet but the speaker wire barely fits through the hole; it's a tight fit.

box :15h 30w 15d

port:13.5x 2.5 x 42 @37.5 hz

port walls cut list: 12d x 23w x 7w

face: 25.25x13.5

sides: 14.5x13.5

rear: 30x13.5

bottom/top: 30x15

 

[blazeplacid 10+ year member]

use CDs instead of an ipod or bluetooth

I get much better results with cd