is this going to hit hard?

[wr11shredz 10+ year member]

hmm im 26 and iv had 7 systems with low end rockford fosgate 15s and i started at 14 so wait thats 12 yrs and the problem was my amps were too big for the weak *** subs!

no ur amps are sh!tty

 

[dlow265 10+ year member]

No, it will not hit hard. Not only that, it will sound like a couple of midgets are beating on trash can lids while taking a shit-piss in your trunk. You dont seem to know what the hell you are talking about, how have you been doing this for 10 years? I suggest you do some research around the net and dont waste your time and money on crap equipment.

lol let me forward you a page on youtube and you will see how hard they hit and then kiss my *** im askin for help not criticism

 

[dlow265 10+ year member]

lol let me forward you a page on youtube and you will see how hard they hit and then kiss my *** im askin for help not criticism

oh and i got the money to blow so i dont care if i blow my stuff thats why i buy good low end stuff its a hobby to me to wire all this shit i love it!!

 

[darkhunter139 10+ year member]

hmm im 26 and iv had 7 systems with low end rockford fosgate 15s and i started at 14 so wait thats 12 yrs and the problem was my amps were too big for the weak *** subs!

Any chance you would consider new stuff?

 

[3kracing 10+ year member]

lol let me forward you a page on youtube and you will see how hard they hit and then kiss my *** im askin for help not criticism

Ok your subs shouldn't be flexing like that. If you just take a little bit of time and actually buy good things. Maybe a Fi BL or something and a good amp to push it you're system will turn out alright. Also, ditch the cap and get a battery

 

[Mitch86 5,000+ posts]

lol let me forward you a page on youtube and you will see how hard they hit and then kiss my *** im askin for help not criticism

I just answered your question honestly... If you already knew that they "hit hard" why did you make this thread? Btw, that was constructive criticism. Your link was nothing but garbage fleamarket subs in a prefab box...//content.invisioncic.com/y282845/emoticons/wow.gif.23d729408e9177caa2a0ed6a2ba6588e.gif where's the bump? //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[djeazie 10+ year member]

no ur amps are sh!tty

said the guy with a Sony amp in his sig.

 

[dlow265 10+ year member]

no ur amps are sh!tty[/quote
i used all rockford fosgate amps too the 500 a2 and the 800a2 old school so you think those are shitty like i said i had too much power

 

[Mitch86 5,000+ posts]

And if you have money to blow, why are you buying the cheapest shit and bragging about it on the internet?

 

[dlow265 10+ year member]

I just answered your question honestly... If you already knew that they "hit hard" why did you make this thread? Btw, that was constructive criticism. Your link was nothing but garbage fleamarket subs in a prefab box...//content.invisioncic.com/y282845/emoticons/wow.gif.23d729408e9177caa2a0ed6a2ba6588e.gif where's the bump? //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

lol that link is the shit and is all the bass i need compared to the rockford p1 those have excursion and punch p1 **** ***

 

[romans535 10+ year member]

ok cool response!! i have the amps i just blew some punch p1 15s with the amps and i got the volfenhags on fed ex. i am running two amps two 4g wires running to the battery is that ok or do i need a distribution block or something

Dam these guys have no mercy, but seriously I'd run a 0 gage to a distribution block and from their go with the 4gage, you'll avoid upgrading so when you upgrade to the RF P2's you shouldn't have any problems.

 

[Pioneer~Saturn 5,000+ posts]

lol let me forward you a page on youtube and you will see how hard they hit and then kiss my *** im askin for help not criticism

Ouch, haha

 

[romans535 10+ year member]

Your amp will clip and damage the subs. The gain is not a volume knob you have to be careful or all your stuff will be damaged. You can either get a DMM or you can just turn on a song you are familiar with, turn the volume about to about 3/4ths Then turn the gain up till you hear distortion then turn them back down a little

LISTEN to this, and don't learn the hardway Like I did, before I found CA.COM of course.

 

[bad_trip 10+ year member]

lol that link is the shit and is all the bass i need compared to the rockford p1 those have excursion and punch p1 **** ***

That video wasn't of your system "bumping". Sounded like bottoming out and pure garbage. If you come around here disregarding any advice people give you, and talking smack on people who are hitting 150+ with single sub setups about how you bang so hard, you might as well not come around at all.

We try to help, if you don't want it, don't ask for it.

 

[Mitch86 5,000+ posts]

lol that link is the shit and is all the bass i need compared to the rockford p1 those have excursion and punch p1 **** ***

That's all that matters... now you can stop asking stupid questions since you've already answered your original question. I normally try to help but in a case like this, you deserve the flames. //content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif//content.invisioncic.com/y282845/emoticons/mad.gif.c18f003ab0ef8a0d9c27ca78d77a6392.gif