Infinty 63.5 install help

[jeeplaw 10+ year member]

Purchased a set of 63.5's from someone on here, and went to go install them today only to find out there are 4 binding posts on each coaxial? Doing some research it seems that this install calls for an infinity crossover as well, is this true? If I don't have crossover, how can I hook up the 4 binding posts to the rear channels on my amp?

I believe 2 binding posts are for the tweets, and the other 2 are for the woofer.

Thanks.

Click to read more...

 

[johnecon2001 5,000+ posts]

You pretty much need that crossover. Or your going to be sending signals to those drivers that they dont like. Just go to ebay and get a cheap set of passive two way crossovers.

 

[jeeplaw 10+ year member]

Would this be a good choice for the cross over?

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=79840&item=5771643198&rd=1&ssPageName=WDVW

And I'm assuming there's a lead out to 2 channels for the amp on each crossover?

 

[~Magick_Man~ 10+ year member]

i believe so, i think those speakers normal cross over is at 3.5 khz

but that one should actually be better since it has a 24db crossover slope.

and it also has an adjustment for the tweeter and woofer.

so you can tone down the output of the tweeter if they are harsh to you.

i dont have any personal experience with them but i thikn they should do you pretty good.

~Magick_Man~

 

[johnecon2001 5,000+ posts]

those are fine.