Hunterw's 87 mazda b2k build *revised*

[SQcrewcab 10+ year member]

Not banned anymore i see. Did you ever find out why Hunter?

 

[hunterw 10+ year member]

yeah......a thread got renamed by a mod that i posted in....got renamed "if you want to get banned, post in this thread" lol

 

[18inchjeepin 10+ year member]

Ballin

 

[soundstreamer 10+ year member]

161db? pshh! Anyone can do that...

 

[WOT]

I think he was going for 63.5

 

[PBateman 10+ year member]

whooodie whoooo.....turn it up **** it! //content.invisioncic.com/y282845/emoticons/veryhappy.gif.fec4fed33b4a1279cf10bdd45a039dae.gif

 

[hunterw 10+ year member]

whooodie whoooo.....turn it up **** it! //content.invisioncic.com/y282845/emoticons/veryhappy.gif.fec4fed33b4a1279cf10bdd45a039dae.gif

well ****....i knew i forgot to do something //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[hunterw 10+ year member]

and thank you guys for the replies

 

[da box king 10+ year member]

hey hunter sick score btw

on that recone did you end up bolting the landing down, or just glue it?

and how do you know when its far enough to glue the cone to the former?

 

[hunterw 10+ year member]

hey hunter sick score btw
on that recone did you end up bolting the landing down, or just glue it?

and how do you know when its far enough to glue the cone to the former?

i bolted her down. BUT the best thing to do is....to predrill through the spiders, then sink the screws. its much easier that way. and on the second question....will you reword that? i m tired and dont get it lol. but i used activator on the glue on the spider landing to speed up the process lol.

 

[da box king 10+ year member]

i bolted her down. BUT the best thing to do is....to predrill through the spiders, then sink the screws. its much easier that way. and on the second question....will you reword that? i m tired and dont get it lol. but i used activator on the glue on the spider landing to speed up the process lol.

well I got a motor from sqcrewcab, and I think im gonna grab one of his 10" recones to play with before I recone it to an 18

But what i was meaning. The cone and the former are not glued together right out of the box, so how do you know where to glue the cone to the former?

I have only done dd/aq recones and they are all one piece

thanks man, I appreciate it

what recones do you have too? 55mm, and 3 spider?

 

[hunterw 10+ year member]

well I got a motor from sqcrewcab, and I think im gonna grab one of his 10" recones to play with before I recone it to an 18
But what i was meaning. The cone and the former are not glued together right out of the box, so how do you know where to glue the cone to the former?

I have only done dd/aq recones and they are all one piece

thanks man, I appreciate it

what recones do you have too? 55mm, and 3 spider?

oh i see. what i do is, do the triple joint last ( cone to former joint) i put the cone on, where the surround is touching the baskets landing, and glue the cone to the former on the inside of the cone.let it dry and then do the surround and then just tilt the sub and get in there real deep like and put a bead around the cone/spider joint. if that makes sense. honestly....remember to line up the bolt down ring and predrill will a small bit, then sink the screws. it will prevent the ring from sliding after you have the ring off and the shims out, and it also prevents you from seperating the spiders when trying to screw the screws in.

 

[hunterw 10+ year member]

and yes 55mm, 3 spider

 

[da box king 10+ year member]

oh i see. what i do is, do the triple joint last ( cone to former joint) i put the cone on, where the surround is touching the baskets landing, and glue the cone to the former on the inside of the cone.let it dry and then do the surround and then just tilt the sub and get in there real deep like and put a bead around the cone/spider joint. if that makes sense. honestly....remember to line up the bolt down ring and predrill will a small bit, then sink the screws. it will prevent the ring from sliding after you have the ring off and the shims out, and it also prevents you from seperating the spiders when trying to screw the screws in.

sounds like it could be a pain the ass:crap:

I appreciate it bud. I will def take all those into consideration.

sorry for dumpin on yur thread, but what glue do you use too? and how does that recone play music and handle the d9?

thats the end of my rant:laugh:

 

[hunterw 10+ year member]

sounds like it could be a pain the ass:crap:
I appreciate it bud. I will def take all those into consideration.

sorry for dumpin on yur thread, but what glue do you use too? and how does that recone play music and handle the d9?

thats the end of my rant:laugh:

na its not dumping buddy //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

i actually used DD glue. i got it for dustcaps, but i had so much of it i did all 3 recones with it, and still have enough to do another lol.

i havent played music on them yet/if i ever do, but they giggle at the d9s still lol. less then 1.5in of movement. im going to clamp power tomorrow. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif man those d9 amps are stout too........25 each and they do awesome man. i put them in protect a few times, testing volume/amp settings, but they turned back on every time with no problems lol. i will be pulling deadener off tomorrow and testing....i think pulling deadener will get me a much better number

 

[hunterw 10+ year member]

btw d.b.k. look at my pics of the woofer with no dustcap on page 24 and you will see where to glue....its easy bro. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[da box king 10+ year member]

na its not dumping buddy //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gifi actually used DD glue. i got it for dustcaps, but i had so much of it i did all 3 recones with it, and still have enough to do another lol.

i havent played music on them yet/if i ever do, but they giggle at the d9s still lol. less then 1.5in of movement. im going to clamp power tomorrow. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif man those d9 amps are stout too........25 each and they do awesome man. i put them in protect a few times, testing volume/amp settings, but they turned back on every time with no problems lol. i will be pulling deadener off tomorrow and testing....i think pulling deadener will get me a much better number

thanks man //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

sounds nice man. Testin with the deadener is a good way to do some gains. Sundownz had some pretty nice results with his. Hope you can pull it off bud

 

[da box king 10+ year member]

btw d.b.k. look at my pics of the woofer with no dustcap on page 24 and you will see where to glue....its easy bro. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

oh nice, I will do so now

 

[hunterw 10+ year member]

thanks man //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
sounds nice man. Testin with the deadener is a good way to do some gains. Sundownz had some pretty nice results with his. Hope you can pull it off bud

well i over deadened so i will be PULLING deadener off lol. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif man thats going to ****

 

[da box king 10+ year member]

well i over deadened so i will be PULLING deadener off lol. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif man thats going to ****

i hear ya....worse part in any build is deadening