Reply to thread

Message: <blockquote data-quote="hunterw" data-source="post: 6180717" data-attributes="member: 580520"><p>oh i see. what i do is, do the triple joint last ( cone to former joint) i put the cone on, where the surround is touching the baskets landing, and glue the cone to the former on the inside of the cone.let it dry and then do the surround and then just tilt the  sub and get in there real deep like and put a bead around the cone/spider joint. if that makes sense. honestly....remember to line up the bolt down ring and predrill will a small bit, then sink the screws. it will prevent the ring from sliding after you have the ring off and the shims out, and it also prevents you from seperating the spiders when trying to screw the screws in.</p></blockquote><p></p>

Top