Hunterw's 87 mazda b2k build *revised*

[TnT_Sounds 10+ year member]

uh no, lol front bags too but we arent there yet lol. 1/2 line and valves. the dump valves will be made smaller. maybe 3/8s. so she doesnt drop all violent like lol. and it will just be d.o.t. 1/2 line.
will have front drop spindles and will have some LTZ tahoe 20s soon i hope //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Gotcha, seeing you have some chassis tech equipment, I assume you have the valves and fittings from them as well?

I would personaly look into hard-lining it with brake line or hydraulic hose and steel compression fittings. The pushin-line valves and fittings ****. I hated them on my taco. Unless you are ok with slow leaks then no worries.//content.invisioncic.com/y282845/emoticons/veryhappy.gif.fec4fed33b4a1279cf10bdd45a039dae.gif

 

[hunterw 10+ year member]

Pull up to the mic / lay frame / 163 (ish) / pick up and roll out? Sound like a sweet plan!

//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[TnT_Sounds 10+ year member]

i think it would be a 3in bd to lay rockers. and 2 to lay pinch welds

seems about right. Same body style as the hardbodys

 

[stevew007 10+ year member]

yeah i have already went through the whole situation. but i say next year cuz ill retire the truck next year. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif if i had too i could write to rules and ethics and im sure they woul be cool with it. im not doing it for spl. so it would be ok i think

but all it takes is some asshat asking about it then going to the judge.theres no proof you didnt make a gain doing a floor pan.

 

[stevew007 10+ year member]

oh and why would you retire the truck???

 

[hunterw 10+ year member]

Gotcha, seeing you have some chassis tech equipment, I assume you have the valves and fittings from them as well?
I would personaly look into hard-lining it with brake line or hydraulic hose and steel compression fittings. The pushin-line valves and fittings ****. I hated them on my taco. Unless you are ok with slow leaks then no worries.//content.invisioncic.com/y282845/emoticons/veryhappy.gif.fec4fed33b4a1279cf10bdd45a039dae.gif

i have airbagit valves for now. i think ill begoing to smc soon though. and i dont plan on push in fittings. it will be reg compression fittings. i have thought about stainless steel hardline, but it gets pricey. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

i have not got the fitting yet though. im going to be doing the weber conversion too //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[TnT_Sounds 10+ year member]

i have airbagit valves for now. i think ill begoing to smc soon though. and i dont plan on push in fittings. it will be reg compression fittings. i have thought about stainless steel hardline, but it gets pricey. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif
i have not got the fitting yet though. im going to be doing the weber conversion too //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

True, I had 1/2" brake line on mine and it was rather cheap. The fittings is where they got me. But it was worth it.

 

[hunterw 10+ year member]

oh and why would you retire the truck???

cuz i have another one //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif thinking about a sb4 build

 

[hunterw 10+ year member]

but all it takes is some asshat asking about it then going to the judge.theres no proof you didnt make a gain doing a floor pan.

it would cost them 500 bucks to do that. and i couls have it in an email. and if i was really serious i could carry it around with me LOL. but like i said im going to wait on it anyway

 

[stevew007 10+ year member]

cuz i have another one //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif thinking about a sb4 build

very good on with the work //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[hunterw 10+ year member]

very good on with the work //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

thank you steve lol. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif still lots to do to this truck. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[hunterw 10+ year member]

 

[stevew007 10+ year member]

very nice! what color you planning?

 

[basebalz13 10+ year member]

he gonna match me, right hunter?

 

[hunterw 10+ year member]

flat black ftw!!!

 

[stevew007 10+ year member]

flat black ftw!!!

//content.invisioncic.com/y282845/emoticons/wow.gif.23d729408e9177caa2a0ed6a2ba6588e.gif

 

[basebalz13 10+ year member]

noooo black and copper fool!

get on AIM now!

 

[hunterw 10+ year member]

//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif for now. lol. maybe when i have money i want to do it like a deep red. almost maroon with a nice little flake to it.

 

[hunterw 10+ year member]

got this in the mail a few ago

 

[stevew007 10+ year member]

got this in the mail a few ago

wow your lucky to have got that already LOL