how can i hook this to my system?

[trevor87 5,000+ posts]

I have a dvd setup similar to this laying around my house.

http://cgi.ebay.com/ebaymotors/XTREME-VIDEO-MOBILE-DVD-CD-MP3-PLAYER_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318QQ_trksidZp3286Q2ec0Q2em14QQhashZitem140283898007QQitemZ140283898007QQptZCarQ5fVideoQ5fNavigation

I have the screen take apart and its just the monitor im thinking about flush mounting it into my dash bezel and hiding the dvd part under the seat but i wana know if i could somehow hook my system up to this so whe i play something on the dvd player it shows on the screen and plays through my door speakers and sub

any ideas?

Click to read more...

 

[FurbiesAndBeans 10+ year member]

Plug in the audio RCAs into the auxilary in your headunit....

 

[trevor87 5,000+ posts]

from my amp?

 

[Linkz 10+ year member]

from my amp?

no from the dvd player

or rather tv out

if there is no rca preouts for the unit then you will have to splice them from the speakers

 

[trevor87 5,000+ posts]

there arent any rcas from the dvd player theres an input for them on the front.

the out put for audio on the dvd player is just a 3.5mm headphone type plug and it says L/R speakers so id need a cable to go from that to my hu for sound

 

[Linkz 10+ year member]

there arent any rcas from the dvd player theres an input for them on the front.
the out put for audio on the dvd player is just a 3.5mm headphone type plug and it says L/R speakers so id need a cable to go from that to my hu for sound

yea you are going to need to buy a pair of rca plugs and some wire. solder one piece of wire to each plug. Then get a 3.5mm jack and solder the respective channel to the 3.5mm jack. Might want to electrical tape or heat shrink it. Also, you may want to buy a line driver to get a decent output. Just be sure to buy one that matches the max or a little below the max rms of the aux channel of your HU.

 

[jermsz]

wouldn't one of these work?

 

[Linkz 10+ year member]

wouldn't one of these work?

Yea that would work. I didn't even think of a pre-made adapter.