have amp and sub box already

[nickm 10+ year member]

This is going under the rear seat of a Dodge 4 door truck.

I lifted the seat 4" and made a box under there. I have 3.75 cubic feet. The box is completely sealed. But porting IS an option if needed. I listen to every thing. I mean ever thing. Classic, wrap, country, pop, Spanish, hard rock. Mostly pop country and Spanish.

My amp for the subs is a Kicker Kx1200.1. I plan on upgrading the rest of the system later. I already have (2) KICKER kx 600.4 to run ever thing else. I also have 2 1.2 caps.

I would like some 12s. But if I 10s would be better suited then I could do that also. I have looked at the kicker solo baric L7 and the Alpine SWR-1242D Type Rs and the infinity 12s (forgot what they are).

Suggestion or recommendations?

Thanks

Click to read more...

 

[lilmaniac2 5,000+ posts]

how big is the box

edit re read post and saw it..... 2 si mag 12s sealed in that would sound great... not sure how well that amp would like a 2ohm load tho

 

[nickm 10+ year member]

here is a link to the pics. My gallery doesnt do short urls. So the pics dont always show up if I hot link them. The amp is supposed to be good to 1 ohm.

http://www.txwheelers.com/modules.php?name=gallery2&g2_view=core.ShowItem&g2_itemId=8351&g2_page=2

 

[lilmaniac2 5,000+ posts]

yea are those chambers seled off from each other looks to me that your boxes are alot smaller than what your original post says

 

[nickm 10+ year member]

thats not my box. I just saved the pics for an idea.

I still need to cover and finish the box. In the pics you only see the top. In page one you can see the bottom, minus the fiber glass bottoms.

http://www.txwheelers.com/modules.php?name=gallery2&g2_view=core.ShowItem&g2_itemId=8351&g2_page=2

 

[nickm 10+ year member]

Ill see if the pics work here. In this pic you can see the bottom. I fiberglassed the "bowl" areas of the truck, to make the bottom of the box.

Sorry the pics only show up as links.

 

[kotec123 10+ year member]

here is what you should do.....wait a month or two untill the new Kicker CVX comes out and put 2 12" CVX in there.....that would be more then enough bass......bass would be comin out of ur asssss...but seriously....do it

 

[nickm 10+ year member]

would/should I port the box with those? Is that enough amp for the new subs? I can sure wait. I kinda ran low on funds. SO another 2 months would be greeat. ANd the box should be covered and look a lot nicer.

here it is just befor being finished.

http://www.txwheelers.com/modules/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=8861&g2_serialNumber=2

 

[kotec123 10+ year member]

yes port them to 35hz...yes it shud be enough

edit:by port them to 35hz i meant port them to about 35 hz...it doesnt have to be exactly 35 hz.... but no more then 38 hz id say

 

[kotec123 10+ year member]

but if u want one of the cleanest baddest and i bet almost the loudest bass systems around....those subs and amp should do it....

 

[nickm 10+ year member]

Thanks a lot for your help. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif I just wanna make sure I am on the right path. Ill figure the port size when I get a little closer to that.