good woofers to replace 3 W6's

[Trenton's loud1 10+ year member]

gnats chuff....nice

 

[BassAce 10+ year member]

If you want it louder, I would go with 4-12w6v2 ported with 800 rms to each.

 

[Trenton's loud1 10+ year member]

i thought the w6's were 400 rms.......I'd also need another 1000/1 or somethin comparable to give them that kind of wattage

 

[Trenton's loud1 10+ year member]

Just ordered 25' of 1/0 cable , a new battery terminal, a big in-line fuse holder, ring terminals and a distribution block from KnuKonceptz to do the BIG 3 and I'm going to run some 1/0 to my amp or amps. I think I'm going to try to run the 3 W6's off of that 1000/1 tomorrow. I believe I can get them down to a 2.67 ohm load. the amp is 1000 rms..is there anyway to get another 200 watts out of that amp?

 

[GrnEydDvl 10+ year member]

Just ordered 25' of 1/0 cable ' date=' a new battery terminal, a big in-line fuse holder, ring terminals and a distribution block from KnuKonceptz to do the BIG 3 and I'm going to run some 1/0 to my amp or amps. I think I'm going to try to run the 3 W6's off of that 1000/1 tomorrow. I believe I can get them down to a 2.67 ohm load. the amp is 1000 rms..is there anyway to get another 200 watts out of that amp?[/quote']
It should do slighty more than 1000 watts at just about any resistance within 1.5-4 ohms. There is no way to increase it significantly.

 

[Trenton's loud1 10+ year member]

thanks bro.....does anyone know of any real reasonable High Output Alternator stores that i can get a quote from?

 

[BIGsherm7272]

excessive amperage