Good setup or not?

e36m3_98
10+ year member

Member
before I go to the local shop and dump a big load of cash I just wanted to see whether you guys think this is a good combo or if you guys would change anything let me know. For some reason I am excited but I also feel as if I am gonna have some buying remorse after don't know why.

buying: morel elate 9 3 way

arc 2300 se for the low

arc 4200 se for the mids and highs

maybe arc dxe and maybe arc flatline to replace the dub

already have: clarion drz 9255, 12w7 , jl 1000/1 amp

other question do you guys think I should get rid of the 1000/1 amp and just get another arc 2300se amp to power it so it will match with the other arcs. also should i still get the dxe even though my deck is capable of doing the 4 way setup?

 
Arc and Morel = great combination for SQ

I personally like all the choices you have here especially the HU //content.invisioncic.com/y282845/emoticons/yumyum.gif.0556df42231b304b9c995aefd13928a8.gif

You'll like it I gurantee it

-Nick-

 
Don't see why you'd need the DXE with the DRZ.

You've selected some of the best built equipment on the market....and it will only sound as good as the install IMHO.

 
and it will only sound as good as the install IMHO
bing bing bing, we have a winner! i was gonna say the same thing, if you're putting that top notch equipment in there make sure you take the time (or money) and do the install right

 
Don't see why you'd need the DXE with the DRZ.
You've selected some of the best built equipment on the market....and it will only sound as good as the install IMHO.
but drz processing = whack //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif. seriously though, with a 4 way setup as you know i don't like the 5 band peq and the slopes on that HU only goes to 18db/oct //content.invisioncic.com/y282845/emoticons/eyebrow.gif.fe2c18d8720fe8c7eaed347b21ea05a5.gif . something is wrong there.

but i do agree, some awesome awesome equipment there. just hope that you or your installer is a good installer. but i'm sure your stuff is an upgrade over stock so it'll sound good to you regardless.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

This would go a long way to alleviating the dimming issue, up to around 4000 watts. It can handle 100A continuous and up to 285A 7 second burst...
6
586
I had some 9500 series 12s by MTX that were some slamming subs!! Should have kept those along with those torpedo RE XXX 12s
15
990
I am doing an all JL audio instal on my new F250 SD . I'm using a Audio Control LC 5i Pro with a JL Audio XDM 700/5 and C3-650's in all 4 doors...
7
906
Id sit down and figure out exactly what all you will be installing for amperage consumption and add another 10-15% amperage useage on top of that...
21
2K

About this thread

e36m3_98

10+ year member
Member
Thread starter
e36m3_98
Joined
Location
seattle,wa
Start date
Participants
Who Replied
Replies
7
Views
453
Last reply date
Last reply from
alphakenny1
20240518_170822.jpg

Dylan27

    May 18, 2024
  • 0
  • 0
20240517_190901.jpg

Dylan27

    May 18, 2024
  • 0
  • 0

New threads

Top