Getting 2 SR12's need some advice.

[GabeC 10+ year member]

Getting two of these, i've heard good things.

http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=4907

I plan on putting them in a sealed box, similar to one that you can get at Circuit City for 60 bucks.

I have an amp but I'm open to getting one that will power these nicely.

Putting them in a 93' Altima with an Alpine 9870, type S door speakers and pioneers in the rear.

So, question is, will the box i have be fine? and recommend me some amps to power these.

Click to read more...

 

[R/T Pimp 10+ year member]

Give them a 1000 rms.

 

[GabeC 10+ year member]

Give them a 1000 rms.

what amp?

 

[GabeC 10+ year member]

kinda leaning towards this:

http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=4207

 

[bad @SS chevy 10+ year member]

lol ur so funny omg
gtfo

dont post if u aint gonna help

are you kidding me? How are you going to ask for advice, then say GTFO?? im lost.. The subs are rated @ 300 rms.. If you give them 500 a piece it would be perfect. And there is no way you will get 600 watts out of the hifonics amp. Im a fan of hifonics, I just like to keep it real.. Id say go for a 800-1000 watt amp...

 

[dadydolas 10+ year member]

http://www.cardiscountstereos.com/catalog%20page.asp?Product+%23=06ZX10001

run them off this

 

[dadydolas 10+ year member]

keep the gain in check to u feel them out

 

[GabeC 10+ year member]

how would i wire them with a mono amp?

 

[dadydolas 10+ year member]

http://www.the12volt.com/caraudio/woofer_configurations.asp~Q~2~I~22

like this

 

[dadydolas 10+ year member]

if u go with that amp go with dual 2 ohm

if it is a 1 ohm stable amp go with dual 4 ohm coils

 

[dadydolas 10+ year member]

if u dont understand ask and i will explain it to you

 

[headbussaboi 10+ year member]

how would i wire them with a mono amp?

If you are asking this question, who is installing your system for you? Better yet, who planned it for you? You need to do more researching before telling someone to GTFO of your thread. They might just do that and you'd be left with retarded questions like this one to wonder about.

2 dual 4 ohm subs can be wired to a 4 or 1 ohm load

2 dual 2 ohm subs can be wired to a 2 or .5 ohm load

find an amp that does XX watts at XX load and buy the subs with the appropriate coils and you are good to go. For example, if you end up buying the Kicker zx1k.1, then get 2 dual 4 ohm subs, wire them in parallel and you are good to go.

 

[dadydolas 10+ year member]

If you are asking this question, who is installing your system for you? Better yet, who planned it for you? You need to do more researching before telling someone to GTFO of your thread. They might just do that and you'd be left with retarded questions like this one to wonder about.
2 dual 4 ohm subs can be wired to a 4 or 1 ohm load

2 dual 2 ohm subs can be wired to a 2 or .5 ohm load

find an amp that does XX watts at XX load and buy the subs with the appropriate coils and you are good to go. For example, if you end up buying the Kicker zx1k.1, then get 2 dual 4 ohm subs, wire them in parallel and you are good to go.

no he needs the dual 2 for that amp

its only stable to 2 ohms

 

[GabeC 10+ year member]

can't seem to find the dimensions of that amp, other than that it's probly the one i'll get.

yea i would need 2 2ohm subs since it doesn't look like that amp is stable at anything less.

only other questions would be would the 2 SR12's compliment that amp well or is there other subs around the same price as the SR's that would be better?

 

[dadydolas 10+ year member]

how much room

for the amp