**GetLikeMe 4 SA-12's / 3500D Build Log! **

[GetLikeMe 10+ year member]

WTF spam? can a mod please delete?

 

[Goindef154 5,000+ posts]

Good looking terminals and spam //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[GetLikeMe 10+ year member]

Lol thanks

 

[GetLikeMe 10+ year member]

Well got home and started workin on the box debating which way to fire the aeros. Couldnt get myself to cut the aeros just yet. So said **** it fired them back. Box is double layered so i mounted them on the 1st layer and going to round over the 2nd layer (kinda flush mounted). My trunk curves in so the box is about 3.5-4.5" away. Well see how it does. If it does bad i can always rebuild the box. Id rather do that than have to order new aero ports because i trimmed them you know? Anyways onto pics..

 

[skitzafit 10+ year member]

Well got home and started workin on the box debating which way to fire the aeros. Couldnt get myself to cut the aeros just yet. So said **** it fired them back. Box is double layered so i mounted them on the 1st layer and going to round over the 2nd layer (kinda flush mounted). My trunk curves in so the box is about 3.5-4.5" away. Well see how it does. If it does bad i can always rebuild the box. Id rather do that than have to order new aero ports because i trimmed them you know?

In case you didn't know. you can buy just the center section

http://www.thrilleraudio.com/detail.aspx?ID=428

 

[photocrazy8 10+ year member]

lookin good, when i come back down to so cal one of these days i want to hear it!

 

[GetLikeMe 10+ year member]

In case you didn't know. you can buy just the center sectionhttp://www.thrilleraudio.com/detail.aspx?ID=428

Not that. I was going to trim the flare on the aero port since my side is 28" and the flares add up to 28 3/4 .

 

[GetLikeMe 10+ year member]

lookin good, when i come back down to so cal one of these days i want to hear it!

For sure man anytime! //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[528hz 10+ year member]

You gotta finish it this weekend, man!

 

[GetLikeMe 10+ year member]

You gotta finish it this weekend, man!

Oh trust me I plan too! Straight after work im going to home depot for resin, some security screws for mounting the amp and L brackets and some other misc stuff //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif I even told my gf dont bother me tomorrow LMAO so she planned somthing with her friends haha

 

[528hz 10+ year member]

GOOD! You may prompt me to do something like this after you're done...

 

[GetLikeMe 10+ year member]

GOOD! You may prompt me to do something like this after you're done...

Ya you've had alot of nice systems lol i always see you selling nice stuff //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif But ya im anxious man my goal is 150. I know its been done with this same setup but not in a trunk before.

 

[skitzafit 10+ year member]

Not that. I was going to trim the flare on the aero port since my side is 28" and the flares add up to 28 3/4 .

Ah.

They have those also

outside flare

http://www.thrilleraudio.com/detail.aspx?ID=425

 

[GetLikeMe 10+ year member]

Ah. They have those also

outside flare

http://www.thrilleraudio.com/detail.aspx?ID=425

LOL well id still rather just backfire and not mess up my flares OK? LOL

 

[528hz 10+ year member]

Yeah...you'll be able to do a 150 easy outlaw. I can do that. Sealed it will be tough unless the meter loves your car.

God speed with you Sir! Make us all proud!!