General opinions 18" or two 10"

[dr_peeb 10+ year member]

so does that mean it would take 4 10s to get to the cone area of 1 18 ??

3 tens = 235.5 square inches, which is just under the area of one 18 at 254 square inches.

Again, flat circles, no cone slope, or cone depth, considered.

 

[Varinabassing 10+ year member]

lol **** they are big when i finish moving i have to buy one Anyone think 1 18 in a camaro will be flex monster like a 8 cube box tuned to 35 or 33

 

[theMessenjah44 10+ year member]

lol **** they are big when i finish moving i have to buy one Anyone think 1 18 in a camaro will be flex monster like a 8 cube box tuned to 35 or 33

Pic of hatch? I doubt it, if the hatch looks like I think it does, you'd be lucky to get 4 cubes, unless you did a creative wall design.

 

[Varinabassing 10+ year member]

oh yea this is going in the back seat walled off.. i am looking for a design for my camaro for 3.5 cubes inthe rear hatch

 

[audioholic 5,000+ posts]

3 tens = 235.5 square inches, which is just under the area as one 18 at 254 square inches.
Again, flat circles, no slopes considered.

If by slpoe you mean depth of the cone, that doesn't not factor into effective radiating surface area.

 

[dr_peeb 10+ year member]

If by slpoe you mean depth of the cone, that doesn't not factor into effective radiating surface area.

Yes, that is what I meant. I wasn't sure if the cone depth, or cone slope, is considered in "cone area". Tks.

 

[plugitin 5,000+ posts]

8 cubes in a camaro...i unno bout that

 

[audioholic 5,000+ posts]

Yes, that is what I meant. I wasn't sure if the cone depth, or cone slope, is considered in "cone area". Tks.

No problem.
A few companies years ago actually tried to claim their 'deep' cones increased cone area, but it was simply a gimmick to entice sales. The most notably of which was Xtant.

Deeper cones however do tend to help with cone rigidity.