Fuse Problem

  • 3
    Participant count
  • Participant list

Element432
10+ year member

Member
95
0
newyork
Okay, recently I just installed another amp(500/1) and everytime I play it decently loud for a short period of a time, my fuse blows. My friend told me that switching from 4gauge wire to 0gauge wire would help this problem. I was just curious if it was true before i spent about $60 dollars on the wire. Any help would be appreciated.

 
wat are the fuse ratings of ur amps? u need a bigger fuse.

The power wire is fused to what it can handle, not what the amps can handle.

(The amps should be seperately fused close to them, if they dont have a fuse built in.)

Definately need a bigger power wire.

 
The power wire is fused to what it can handle, not what the amps can handle.
(The amps should be seperately fused close to them, if they dont have a fuse built in.)

Definately need a bigger power wire.
thank you for your input but i already knew that I was getting into just an easy way for him to do it himself by just adding all the fuses on the amp also if he needed a larger wire. 4gauge should handle 500/1 dont you think? also i do know also that the fuse is the protect the wire not the amp thanx for refreshining my memory...

 
4gauge should handle 500/1 dont you think? also i do know also that the fuse is the protect the wire not the amp thanx for refreshining my memory...

He said the 500/1 was "another amp", which sounds like he already had an amp in the car before he installed that one.

Dont know what the other amp is, but if he's using a low quality 4ga. wiring kit its quite possible for 800w to be too much.

 
Yeah, this makes 2 500/1's. Thanks for the help //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

I made a lot of money repairing fuse boxes that were destroyed from people taping into them. Pay once by doing it right. Do it wrong, the second...
14
483
It would be cheaper, it might be easier to find a place to mount it, and you would have a ton of options if you just do two, 3 slot fuse holders...
4
639
My bad, yes, I read them each as having two 4ohm coils. The JBL diagram left a bit to be desired, IMO. ;) And a double yes, thought U was talking...
9
1K
I plan on getting the fuse to run as a front sub/midbass in my kick panels...I've heard they sound good but you definitely wont get mirror shaking...
3
2K

About this thread

Element432

10+ year member
Member
Thread starter
Element432
Joined
Location
newyork
Start date
Participants
Who Replied
Replies
6
Views
518
Last reply date
Last reply from
Element432
Screenshot_20240531-022053.png

1aespinoza

    May 31, 2024
  • 0
  • 0
Screenshot_20240524_202505_Samsung Internet.jpg

winkychevelle

    May 24, 2024
  • 0
  • 0

New threads

Top