Free Box designs.

[NissanKicker 10+ year member]

Here you go!

I currently have (4) 12" D2 Eclipse SW7200s in my 99 Nissan Sentra GXE. They are facing inside the cab. I hit 145.9 on an AC180. So it's loud, but I don't like sealed.... I'm into ported.

I need a box built for 3 12s ported, or a really BIG box for 2 12s ported.

I measured my trunk and the specs are as follows:

Opening of the trunk: 36" (That's sliding the box straight in - if angling the box up you only have 12" to work with)

High: 16" MAX

Length: 43" (43.5") MAX

Deep: 22"

--------------------------------------

This is the current box I have in the trunk:

Front of the box: 26" Long

Back of the box: 43" Long

Angle from front to the side: 13"

Square side: 13"

... (Which makes it 26" Deep)

Hieght: 14

These are some pictures of what I'm talkin' about:

These (2) are pictures of the angle part of box

http://i214.photobucket.com/albums/c...121507_010.jpg

http://i214.photobucket.com/albums/c...121507_011.jpg

These (2) are pictures of the trunk opening:

http://i214.photobucket.com/albums/c...121507_012.jpg

http://i214.photobucket.com/albums/c...121507_007.jpg

I'm really hoping that I can get a (3) 12" ported box with these dimensions... But if not, I guess I'll have to go w/ 2 or stick with what I have.

Thanks in advance, and let me know what all can be done.

 

[hllywood29 10+ year member]

i need an enclosure 12 cubic ft internally after sub port and bracing.its for 2 18 treo ssx subs.

sub displacement is 0.31 ft or 8.90 L per sub.i want a 200 sq inch port tuned to 35 hz.box width is 48 hieght is 25 deepth is 28.thanks

 

[atlninja82 10+ year member]

hey jesse if you could do this for me i would appreciate it man.i got a 93 chevy 1500 reg cab pickup. i am putting 2 12"s in there(or atleast hoping to) they are the memphis m class. 5.5 in mounting depth. i would like to have a box that would enable my seat(drivers side) to not have to be moved up at all but if the other seat(passengers bench seat) needs to be then thats fine but if there is a possible way to have a box all the way across with out having to move the seats up that would be good. but if there isnt ill move the bench seat up and just have the box behind there instead of behind mine. sealed is fine but if there is a way to make it ported and tuned to like 35 hz then let me know.

thanks,

-eric

 

[jesse59672 10+ year member]

Hey man here's my spec's of the hatch.
width i can go: 3ft 3/8

Length 29 1/4

height of box i can go 2ft 1/4

Sub's goin in Two 15 inch audiopipe txx-ap15

Here's specs of subs

xmax(inches): 0.45

vented box recomended cu/ft : 4.67

Want to do ported tuned at 35hz Subs up port back . port on passenger side

Let me know man thanks in advance.

http://subwoofertools.com/forum/ported-box.asp?Ew=25&Eh=15&Dia=9&Xmax=11.4&Vd=.1&NumW=2&Vb=4.7&Fb=35&Qts=&Vas=&Fs=&CE=0

The colors of the box should match the colors in the link. Just remember you wanted the port on the other side

 

[jesse59672 10+ year member]

 

[jesse59672 10+ year member]

i need a design for an enclosure for a single 12 BTL with these max dimensions
depth 28

width 32

height 14

i'd really appreciate it as if i have no clue on designing plans

tuning around 34-35hz

http://www.subwoofertools.com/forum/ported-box.asp?Ew=27&Eh=14&Dia=6&Xmax=16&Vd=.15&NumW=1&Vb=1.75&Fb=34&Qts=&Vas=&Fs=&CE=0

like previously, the colors should match up with the ones in that link

cheers

 

[jesse59672 10+ year member]

Here you go!
I currently have (4) 12" D2 Eclipse SW7200s in my 99 Nissan Sentra GXE. They are facing inside the cab. I hit 145.9 on an AC180. So it's loud, but I don't like sealed.... I'm into ported.

I need a box built for 3 12s ported, or a really BIG box for 2 12s ported.

I measured my trunk and the specs are as follows:

Opening of the trunk: 36" (That's sliding the box straight in - if angling the box up you only have 12" to work with)

High: 16" MAX

Length: 43" (43.5") MAX

Deep: 22"

--------------------------------------

This is the current box I have in the trunk:

Front of the box: 26" Long

Back of the box: 43" Long

Angle from front to the side: 13"

Square side: 13"

... (Which makes it 26" Deep)

Hieght: 14

These are some pictures of what I'm talkin' about:

These (2) are pictures of the angle part of box

http://i214.photobucket.com/albums/c...121507_010.jpg

http://i214.photobucket.com/albums/c...121507_011.jpg

These (2) are pictures of the trunk opening:

http://i214.photobucket.com/albums/c...121507_012.jpg

http://i214.photobucket.com/albums/c...121507_007.jpg

I'm really hoping that I can get a (3) 12" ported box with these dimensions... But if not, I guess I'll have to go w/ 2 or stick with what I have.

Thanks in advance, and let me know what all can be done.

your links don't work, sorry

 

[dragon.breath 10+ year member]

box size 12 x 30 x 18 for 2 kicker L5 10s with 700watts rms

 

[dragon.breath 10+ year member]

thanks

 

[jesse59672 10+ year member]

i need an enclosure 12 cubic ft internally after sub port and bracing.its for 2 18 treo ssx subs.sub displacement is 0.31 ft or 8.90 L per sub.i want a 200 sq inch port tuned to 35 hz.box width is 48 hieght is 25 deepth is 28.thanks

you want subs up port back? more or what kind of car it's going into. are you dead set on 12cubes @ 35hz or could it be more like 10-11 cubes?

 

[jesse59672 10+ year member]

box size 12 x 30 x 18 for 2 kicker L5 10s with 700watts rms

any preference on tuning? subs back port back?

 

[sl600 10+ year member]

2 12" pioneer 5000spl going in the bed of silverado truck,external mesurments are w 46 x h 17.5 x d 19 tuned@35 ( inverted setup, seperate chambers)

sub would be mounted in the 46 x 17.5 section of the box,using 1" mdf

p.s.

depth could be changed if you think of a better size box (between 19-22" )

thank you for your help

 

[jesse59672 10+ year member]

box size 12 x 30 x 18 for 2 kicker L5 10s with 700watts rms

i'm guessing you want it sealed. you aren't going to get a ported box with that small of dimensions

 

[texasound82 10+ year member]

looking to build sealed, downfiring enclosure to replace center console in chevy crew cab.

Dimensions are L=34" W=13.25" H=14"

2-10"w6'S

10W6v2 DRIVER SPECIFICATIONS

10W6v2-D4

Free Air Resonance (Fs): 28.5 Hz

Electrical “Q” (Qes): 0.497

Mechanical “Q” (Qms): 8.458

Total Speaker “Q” (Qts): 0.469

Equivalent Compliance (Vas): 1.18 cu. ft. / 33.4 liters

Driver Displacement: 0.068 cu. ft. / 1.9 liters

 

[ArrizX 10+ year member]

give me a design for two tc-7 10''s. each gets about 5cubes. i need it designed for a 2002 honda civic si hatchback